%%LOGFILE: /build/khadas/fenix/logs/build_test.1639623492.log [Thu 16 Dec 2021 10:58:12 AM CST] %%CMD: scripts/tests/build_test -s Install-deps -e REL %%GITHUB action detected :: GITHUB_ENV: /home/build/actions-runner/_work/_temp/_runner_file_commands/set_env_f5b5bd18-9e52-4778-b91c-58a571a7bc61 %%GITHUB_ENV: %%USED_SPACE: 12% %%Fenix Release Build Version: v1.0.8 # make clean -C scripts/tests/../.. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' ./scripts/clean.sh [i] FENIX (scripts/clean.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated Info: Check active build session ../fenix.build/build.pid [1120629] Info: Start new build session ../fenix.build/build.pid [1120629] Info: [main] This script requires root privileges, trying to use sudo, please enter your passowrd! Info: sudo works... Info: Cleanup build images... => /home/build/actions-runner/_work/fenix/fenix.build [i] umount_deep /home/build/actions-runner/_work/fenix/fenix.build Done. Thu 16 Dec 2021 10:58:12 AM CST make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%BUILD LIST[]: Install-deps VIM1-ubuntu-server-bionic-vendor-emmc-REL-CHK VIM1-ubuntu-xfce-bionic-vendor-emmc-REL-CHK VIM1-ubuntu-server-bionic-vendor-sdusb-REL VIM1-ubuntu-xfce-bionic-vendor-sdusb-REL VIM1-ubuntu-server-focal-mainline-sdusb-REL-TEST VIM1-ubuntu-gnome-focal-mainline-sdusb-REL-TEST VIM2-ubuntu-server-bionic-vendor-emmc-REL-CHK VIM2-ubuntu-xfce-bionic-vendor-emmc-REL-CHK VIM2-ubuntu-server-bionic-vendor-sdusb-REL VIM2-ubuntu-xfce-bionic-vendor-sdusb-REL VIM2-ubuntu-server-focal-mainline-sdusb-REL-TEST VIM2-ubuntu-gnome-focal-mainline-sdusb-REL-TEST VIM3-ubuntu-server-focal-vendor-emmc-REL-CHK VIM3-ubuntu-gnome-focal-vendor-emmc-REL-CHK VIM3-ubuntu-server-focal-vendor-sdusb-REL VIM3-ubuntu-gnome-focal-vendor-sdusb-REL VIM3-ubuntu-server-focal-mainline-sdusb-REL-TEST VIM3-ubuntu-gnome-focal-mainline-sdusb-REL-TEST VIM3L-ubuntu-server-focal-vendor-emmc-REL-CHK VIM3L-ubuntu-gnome-focal-vendor-emmc-REL-CHK VIM3L-ubuntu-server-focal-vendor-sdusb-REL VIM3L-ubuntu-gnome-focal-vendor-sdusb-REL VIM3L-ubuntu-server-focal-mainline-sdusb-REL-TEST VIM3L-ubuntu-gnome-focal-mainline-sdusb-REL-TEST Edge-ubuntu-server-bionic-vendor-emmc-REL-CHK Edge-ubuntu-lxde-bionic-vendor-emmc-REL-CHK Edge-ubuntu-server-bionic-vendor-sdusb-REL Edge-ubuntu-lxde-bionic-vendor-sdusb-REL Edge-ubuntu-server-focal-mainline-sdusb-REL-TEST Edge-ubuntu-gnome-focal-mainline-sdusb-REL-TEST %%BUILD: ../fenix.build %%DOWNLOAD_PKG_DIR: ../fenix.dl %%PPID WATCH: 1120438(1120439) [/usr/bin/bash -e /home/build/actions-runner/_work/_temp/b881ebc8-c2ea-4830-8c2d-abc889b02f91.sh ] %%TEST[1/31]: Install-deps develop STARTING [Thu 16 Dec 2021 10:58:12 AM CST] 1120455 # sudo dpkg --configure -a # sudo apt-get update Hit:1 http://us.archive.ubuntu.com/ubuntu focal InRelease Hit:2 http://security.ubuntu.com/ubuntu focal-security InRelease Hit:3 http://us.archive.ubuntu.com/ubuntu focal-updates InRelease Hit:4 http://us.archive.ubuntu.com/ubuntu focal-backports InRelease Reading package lists... # sudo apt-get install -y git make lsb-release qemu-user-static zip Reading package lists... Building dependency tree... Reading state information... lsb-release is already the newest version (11.1.0ubuntu2). make is already the newest version (4.2.1-1.2). zip is already the newest version (3.0-11build1). git is already the newest version (1:2.25.1-1ubuntu3.2). qemu-user-static is already the newest version (1:4.2-3ubuntu6.18). 0 upgraded, 0 newly installed, 0 to remove and 150 not upgraded. %%TEST[1/31]: Install-deps == OK duration: 1 = 00:00:01 total: 1 = 00:00:01 %%TEST[2/31]: VIM1-ubuntu-server-bionic-vendor-emmc-REL-CHK release STARTING [Thu 16 Dec 2021 10:58:13 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM1 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM1 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM1 Uboot Version: 2015.01 Uboot Configuration: kvim_defconfig Uboot Branch: khadas-vims-v2015.01 Linux Version: 4.9 Linux Configuration: kvims_defconfig Linux DTB: arch/arm64/boot/dts/amlogic/kvim_linux.dtb Linux Branch: khadas-vims-4.9.y Distribution: Ubuntu Distribution Release: bionic Distribution Type: server Distribution Arch: arm64 Install Type: EMMC Final Image: VIM1_Ubuntu-server-bionic_Linux-4.9_arm64_EMMC_V1.0.8-211216.img Compressed Image: VIM1_Ubuntu-server-bionic_Linux-4.9_arm64_EMMC_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1120946] Info: Start new build session ../fenix.build/build.pid [1120946] Info: Cleanup old build session Info: Build host: focal target: bionic [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master Switched to a new branch 'master' Branch 'master' set up to track remote branch 'master' from 'origin'. From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[2/31]: VIM1-ubuntu-server-bionic-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 3 = 00:00:03 total: 4 = 00:00:04 %%TEST[3/31]: VIM1-ubuntu-xfce-bionic-vendor-emmc-REL-CHK release STARTING [Thu 16 Dec 2021 10:58:16 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM1 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=xfce DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM1 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=xfce DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM1 Uboot Version: 2015.01 Uboot Configuration: kvim_defconfig Uboot Branch: khadas-vims-v2015.01 Linux Version: 4.9 Linux Configuration: kvims_defconfig Linux DTB: arch/arm64/boot/dts/amlogic/kvim_linux.dtb Linux Branch: khadas-vims-4.9.y Distribution: Ubuntu Distribution Release: bionic Distribution Type: xfce Distribution Arch: arm64 Install Type: EMMC Final Image: VIM1_Ubuntu-xfce-bionic_Linux-4.9_arm64_EMMC_V1.0.8-211216.img Compressed Image: VIM1_Ubuntu-xfce-bionic_Linux-4.9_arm64_EMMC_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1121125] Info: Start new build session ../fenix.build/build.pid [1121125] Info: Cleanup old build session Info: Build host: focal target: bionic [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[3/31]: VIM1-ubuntu-xfce-bionic-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 5 = 00:00:05 %%TEST[4/31]: VIM1-ubuntu-server-bionic-vendor-sdusb-REL release STARTING [Thu 16 Dec 2021 10:58:17 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM1 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM1 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM1 Uboot Version: 2015.01 Uboot Configuration: kvim_defconfig Uboot Branch: khadas-vims-v2015.01 Linux Version: 4.9 Linux Configuration: kvims_defconfig Linux DTB: arch/arm64/boot/dts/amlogic/kvim_linux.dtb Linux Branch: khadas-vims-4.9.y Distribution: Ubuntu Distribution Release: bionic Distribution Type: server Distribution Arch: arm64 Install Type: SD-USB Final Image: VIM1_Ubuntu-server-bionic_Linux-4.9_arm64_SD-USB_V1.0.8-211216.img Compressed Image: VIM1_Ubuntu-server-bionic_Linux-4.9_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1121294] Info: Start new build session ../fenix.build/build.pid [1121294] Info: Cleanup old build session Info: Build host: focal target: bionic [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[4/31]: VIM1-ubuntu-server-bionic-vendor-sdusb-REL == ERROR exit_code: 2 duration: 0 = 00:00:00 total: 5 = 00:00:05 %%TEST[5/31]: VIM1-ubuntu-xfce-bionic-vendor-sdusb-REL release STARTING [Thu 16 Dec 2021 10:58:17 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM1 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=xfce DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM1 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=xfce DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM1 Uboot Version: 2015.01 Uboot Configuration: kvim_defconfig Uboot Branch: khadas-vims-v2015.01 Linux Version: 4.9 Linux Configuration: kvims_defconfig Linux DTB: arch/arm64/boot/dts/amlogic/kvim_linux.dtb Linux Branch: khadas-vims-4.9.y Distribution: Ubuntu Distribution Release: bionic Distribution Type: xfce Distribution Arch: arm64 Install Type: SD-USB Final Image: VIM1_Ubuntu-xfce-bionic_Linux-4.9_arm64_SD-USB_V1.0.8-211216.img Compressed Image: VIM1_Ubuntu-xfce-bionic_Linux-4.9_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1121464] Info: Start new build session ../fenix.build/build.pid [1121464] Info: Cleanup old build session Info: Build host: focal target: bionic [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[5/31]: VIM1-ubuntu-xfce-bionic-vendor-sdusb-REL == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 6 = 00:00:06 %%TEST[6/31]: VIM1-ubuntu-server-focal-mainline-sdusb-REL-TEST release STARTING [Thu 16 Dec 2021 10:58:18 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM1 LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM1 LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM1 Uboot Version: mainline Uboot Configuration: khadas-vim_defconfig Uboot Branch: master Linux Version: mainline Linux Configuration: defconfig Linux DTB: arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb Linux Branch: master Distribution: Ubuntu Distribution Release: focal Distribution Type: server Distribution Arch: arm64 Install Type: SD-USB Final Image: VIM1_Ubuntu-server-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img Compressed Image: VIM1_Ubuntu-server-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1121628] Info: Start new build session ../fenix.build/build.pid [1121628] Info: Cleanup old build session Info: Build host: focal target: focal [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[6/31]: VIM1-ubuntu-server-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 7 = 00:00:07 %%TEST[7/31]: VIM1-ubuntu-gnome-focal-mainline-sdusb-REL-TEST release STARTING [Thu 16 Dec 2021 10:58:19 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM1 LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=gnome DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM1 LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=gnome DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM1 Uboot Version: mainline Uboot Configuration: khadas-vim_defconfig Uboot Branch: master Linux Version: mainline Linux Configuration: defconfig Linux DTB: arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb Linux Branch: master Distribution: Ubuntu Distribution Release: focal Distribution Type: gnome Distribution Arch: arm64 Install Type: SD-USB Final Image: VIM1_Ubuntu-gnome-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img Compressed Image: VIM1_Ubuntu-gnome-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1121792] Info: Start new build session ../fenix.build/build.pid [1121792] Info: Cleanup old build session Info: Build host: focal target: focal [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[7/31]: VIM1-ubuntu-gnome-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 8 = 00:00:08 %%TEST[8/31]: VIM2-ubuntu-server-bionic-vendor-emmc-REL-CHK release STARTING [Thu 16 Dec 2021 10:58:20 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM2 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM2 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM2 Uboot Version: 2015.01 Uboot Configuration: kvim2_defconfig Uboot Branch: khadas-vims-v2015.01 Linux Version: 4.9 Linux Configuration: kvims_defconfig Linux DTB: arch/arm64/boot/dts/amlogic/kvim2_linux.dtb Linux Branch: khadas-vims-4.9.y Distribution: Ubuntu Distribution Release: bionic Distribution Type: server Distribution Arch: arm64 Install Type: EMMC Final Image: VIM2_Ubuntu-server-bionic_Linux-4.9_arm64_EMMC_V1.0.8-211216.img Compressed Image: VIM2_Ubuntu-server-bionic_Linux-4.9_arm64_EMMC_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1121963] Info: Start new build session ../fenix.build/build.pid [1121963] Info: Cleanup old build session Info: Build host: focal target: bionic [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[8/31]: VIM2-ubuntu-server-bionic-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 9 = 00:00:09 %%TEST[9/31]: VIM2-ubuntu-xfce-bionic-vendor-emmc-REL-CHK release STARTING [Thu 16 Dec 2021 10:58:21 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM2 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=xfce DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM2 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=xfce DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM2 Uboot Version: 2015.01 Uboot Configuration: kvim2_defconfig Uboot Branch: khadas-vims-v2015.01 Linux Version: 4.9 Linux Configuration: kvims_defconfig Linux DTB: arch/arm64/boot/dts/amlogic/kvim2_linux.dtb Linux Branch: khadas-vims-4.9.y Distribution: Ubuntu Distribution Release: bionic Distribution Type: xfce Distribution Arch: arm64 Install Type: EMMC Final Image: VIM2_Ubuntu-xfce-bionic_Linux-4.9_arm64_EMMC_V1.0.8-211216.img Compressed Image: VIM2_Ubuntu-xfce-bionic_Linux-4.9_arm64_EMMC_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1122133] Info: Start new build session ../fenix.build/build.pid [1122133] Info: Cleanup old build session Info: Build host: focal target: bionic [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[9/31]: VIM2-ubuntu-xfce-bionic-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 0 = 00:00:00 total: 9 = 00:00:09 %%TEST[10/31]: VIM2-ubuntu-server-bionic-vendor-sdusb-REL release STARTING [Thu 16 Dec 2021 10:58:21 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM2 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM2 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM2 Uboot Version: 2015.01 Uboot Configuration: kvim2_defconfig Uboot Branch: khadas-vims-v2015.01 Linux Version: 4.9 Linux Configuration: kvims_defconfig Linux DTB: arch/arm64/boot/dts/amlogic/kvim2_linux.dtb Linux Branch: khadas-vims-4.9.y Distribution: Ubuntu Distribution Release: bionic Distribution Type: server Distribution Arch: arm64 Install Type: SD-USB Final Image: VIM2_Ubuntu-server-bionic_Linux-4.9_arm64_SD-USB_V1.0.8-211216.img Compressed Image: VIM2_Ubuntu-server-bionic_Linux-4.9_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1122304] Info: Start new build session ../fenix.build/build.pid [1122304] Info: Cleanup old build session Info: Build host: focal target: bionic [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[10/31]: VIM2-ubuntu-server-bionic-vendor-sdusb-REL == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 10 = 00:00:10 %%TEST[11/31]: VIM2-ubuntu-xfce-bionic-vendor-sdusb-REL release STARTING [Thu 16 Dec 2021 10:58:22 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM2 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=xfce DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM2 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=xfce DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM2 Uboot Version: 2015.01 Uboot Configuration: kvim2_defconfig Uboot Branch: khadas-vims-v2015.01 Linux Version: 4.9 Linux Configuration: kvims_defconfig Linux DTB: arch/arm64/boot/dts/amlogic/kvim2_linux.dtb Linux Branch: khadas-vims-4.9.y Distribution: Ubuntu Distribution Release: bionic Distribution Type: xfce Distribution Arch: arm64 Install Type: SD-USB Final Image: VIM2_Ubuntu-xfce-bionic_Linux-4.9_arm64_SD-USB_V1.0.8-211216.img Compressed Image: VIM2_Ubuntu-xfce-bionic_Linux-4.9_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1122475] Info: Start new build session ../fenix.build/build.pid [1122475] Info: Cleanup old build session Info: Build host: focal target: bionic [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[11/31]: VIM2-ubuntu-xfce-bionic-vendor-sdusb-REL == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 11 = 00:00:11 %%TEST[12/31]: VIM2-ubuntu-server-focal-mainline-sdusb-REL-TEST release STARTING [Thu 16 Dec 2021 10:58:23 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM2 LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM2 LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM2 Uboot Version: mainline Uboot Configuration: khadas-vim2_defconfig Uboot Branch: master Linux Version: mainline Linux Configuration: defconfig Linux DTB: arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb Linux Branch: master Distribution: Ubuntu Distribution Release: focal Distribution Type: server Distribution Arch: arm64 Install Type: SD-USB Final Image: VIM2_Ubuntu-server-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img Compressed Image: VIM2_Ubuntu-server-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1122640] Info: Start new build session ../fenix.build/build.pid [1122640] Info: Cleanup old build session Info: Build host: focal target: focal [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[12/31]: VIM2-ubuntu-server-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 12 = 00:00:12 %%TEST[13/31]: VIM2-ubuntu-gnome-focal-mainline-sdusb-REL-TEST release STARTING [Thu 16 Dec 2021 10:58:24 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM2 LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=gnome DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM2 LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=gnome DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM2 Uboot Version: mainline Uboot Configuration: khadas-vim2_defconfig Uboot Branch: master Linux Version: mainline Linux Configuration: defconfig Linux DTB: arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb Linux Branch: master Distribution: Ubuntu Distribution Release: focal Distribution Type: gnome Distribution Arch: arm64 Install Type: SD-USB Final Image: VIM2_Ubuntu-gnome-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img Compressed Image: VIM2_Ubuntu-gnome-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1122805] Info: Start new build session ../fenix.build/build.pid [1122805] Info: Cleanup old build session Info: Build host: focal target: focal [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[13/31]: VIM2-ubuntu-gnome-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 13 = 00:00:13 %%TEST[14/31]: VIM3-ubuntu-server-focal-vendor-emmc-REL-CHK release STARTING [Thu 16 Dec 2021 10:58:25 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM3 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM3 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM3 Uboot Version: 2015.01 Uboot Configuration: kvim3_defconfig Uboot Branch: khadas-vims-v2015.01 Linux Version: 4.9 Linux Configuration: kvims_defconfig Linux DTB: arch/arm64/boot/dts/amlogic/kvim3_linux.dtb Linux Branch: khadas-vims-4.9.y Distribution: Ubuntu Distribution Release: focal Distribution Type: server Distribution Arch: arm64 Install Type: EMMC Final Image: VIM3_Ubuntu-server-focal_Linux-4.9_arm64_EMMC_V1.0.8-211216.img Compressed Image: VIM3_Ubuntu-server-focal_Linux-4.9_arm64_EMMC_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1122977] Info: Start new build session ../fenix.build/build.pid [1122977] Info: Cleanup old build session Info: Build host: focal target: focal [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[14/31]: VIM3-ubuntu-server-focal-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 0 = 00:00:00 total: 13 = 00:00:13 %%TEST[15/31]: VIM3-ubuntu-gnome-focal-vendor-emmc-REL-CHK release STARTING [Thu 16 Dec 2021 10:58:25 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM3 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=gnome DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM3 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=gnome DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM3 Uboot Version: 2015.01 Uboot Configuration: kvim3_defconfig Uboot Branch: khadas-vims-v2015.01 Linux Version: 4.9 Linux Configuration: kvims_defconfig Linux DTB: arch/arm64/boot/dts/amlogic/kvim3_linux.dtb Linux Branch: khadas-vims-4.9.y Distribution: Ubuntu Distribution Release: focal Distribution Type: gnome Distribution Arch: arm64 Install Type: EMMC Final Image: VIM3_Ubuntu-gnome-focal_Linux-4.9_arm64_EMMC_V1.0.8-211216.img Compressed Image: VIM3_Ubuntu-gnome-focal_Linux-4.9_arm64_EMMC_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1123149] Info: Start new build session ../fenix.build/build.pid [1123149] Info: Cleanup old build session Info: Build host: focal target: focal [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[15/31]: VIM3-ubuntu-gnome-focal-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 14 = 00:00:14 %%TEST[16/31]: VIM3-ubuntu-server-focal-vendor-sdusb-REL release STARTING [Thu 16 Dec 2021 10:58:26 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM3 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM3 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM3 Uboot Version: 2015.01 Uboot Configuration: kvim3_defconfig Uboot Branch: khadas-vims-v2015.01 Linux Version: 4.9 Linux Configuration: kvims_defconfig Linux DTB: arch/arm64/boot/dts/amlogic/kvim3_linux.dtb Linux Branch: khadas-vims-4.9.y Distribution: Ubuntu Distribution Release: focal Distribution Type: server Distribution Arch: arm64 Install Type: SD-USB Final Image: VIM3_Ubuntu-server-focal_Linux-4.9_arm64_SD-USB_V1.0.8-211216.img Compressed Image: VIM3_Ubuntu-server-focal_Linux-4.9_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1123322] Info: Start new build session ../fenix.build/build.pid [1123322] Info: Cleanup old build session Info: Build host: focal target: focal [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[16/31]: VIM3-ubuntu-server-focal-vendor-sdusb-REL == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 15 = 00:00:15 %%TEST[17/31]: VIM3-ubuntu-gnome-focal-vendor-sdusb-REL release STARTING [Thu 16 Dec 2021 10:58:27 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM3 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=gnome DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM3 LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=gnome DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM3 Uboot Version: 2015.01 Uboot Configuration: kvim3_defconfig Uboot Branch: khadas-vims-v2015.01 Linux Version: 4.9 Linux Configuration: kvims_defconfig Linux DTB: arch/arm64/boot/dts/amlogic/kvim3_linux.dtb Linux Branch: khadas-vims-4.9.y Distribution: Ubuntu Distribution Release: focal Distribution Type: gnome Distribution Arch: arm64 Install Type: SD-USB Final Image: VIM3_Ubuntu-gnome-focal_Linux-4.9_arm64_SD-USB_V1.0.8-211216.img Compressed Image: VIM3_Ubuntu-gnome-focal_Linux-4.9_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1123494] Info: Start new build session ../fenix.build/build.pid [1123494] Info: Cleanup old build session Info: Build host: focal target: focal [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[17/31]: VIM3-ubuntu-gnome-focal-vendor-sdusb-REL == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 16 = 00:00:16 %%TEST[18/31]: VIM3-ubuntu-server-focal-mainline-sdusb-REL-TEST release STARTING [Thu 16 Dec 2021 10:58:28 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM3 LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM3 LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM3 Uboot Version: mainline Uboot Configuration: khadas-vim3_defconfig Uboot Branch: master Linux Version: mainline Linux Configuration: defconfig Linux DTB: arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dtb Linux Branch: master Distribution: Ubuntu Distribution Release: focal Distribution Type: server Distribution Arch: arm64 Install Type: SD-USB Final Image: VIM3_Ubuntu-server-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img Compressed Image: VIM3_Ubuntu-server-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1123659] Info: Start new build session ../fenix.build/build.pid [1123659] Info: Cleanup old build session Info: Build host: focal target: focal [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[18/31]: VIM3-ubuntu-server-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 17 = 00:00:17 %%TEST[19/31]: VIM3-ubuntu-gnome-focal-mainline-sdusb-REL-TEST release STARTING [Thu 16 Dec 2021 10:58:29 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM3 LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=gnome DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM3 LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=gnome DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM3 Uboot Version: mainline Uboot Configuration: khadas-vim3_defconfig Uboot Branch: master Linux Version: mainline Linux Configuration: defconfig Linux DTB: arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dtb Linux Branch: master Distribution: Ubuntu Distribution Release: focal Distribution Type: gnome Distribution Arch: arm64 Install Type: SD-USB Final Image: VIM3_Ubuntu-gnome-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img Compressed Image: VIM3_Ubuntu-gnome-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1123825] Info: Start new build session ../fenix.build/build.pid [1123825] Info: Cleanup old build session Info: Build host: focal target: focal [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[19/31]: VIM3-ubuntu-gnome-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 0 = 00:00:00 total: 17 = 00:00:17 %%TEST[20/31]: VIM3L-ubuntu-server-focal-vendor-emmc-REL-CHK release STARTING [Thu 16 Dec 2021 10:58:29 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM3L LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM3L LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM3L Uboot Version: 2015.01 Uboot Configuration: kvim3l_defconfig Uboot Branch: khadas-vims-v2015.01 Linux Version: 4.9 Linux Configuration: kvims_defconfig Linux DTB: arch/arm64/boot/dts/amlogic/kvim3l_linux.dtb Linux Branch: khadas-vims-4.9.y Distribution: Ubuntu Distribution Release: focal Distribution Type: server Distribution Arch: arm64 Install Type: EMMC Final Image: VIM3L_Ubuntu-server-focal_Linux-4.9_arm64_EMMC_V1.0.8-211216.img Compressed Image: VIM3L_Ubuntu-server-focal_Linux-4.9_arm64_EMMC_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1123998] Info: Start new build session ../fenix.build/build.pid [1123998] Info: Cleanup old build session Info: Build host: focal target: focal [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[20/31]: VIM3L-ubuntu-server-focal-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 18 = 00:00:18 %%TEST[21/31]: VIM3L-ubuntu-gnome-focal-vendor-emmc-REL-CHK release STARTING [Thu 16 Dec 2021 10:58:30 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM3L LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=gnome DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM3L LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=gnome DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM3L Uboot Version: 2015.01 Uboot Configuration: kvim3l_defconfig Uboot Branch: khadas-vims-v2015.01 Linux Version: 4.9 Linux Configuration: kvims_defconfig Linux DTB: arch/arm64/boot/dts/amlogic/kvim3l_linux.dtb Linux Branch: khadas-vims-4.9.y Distribution: Ubuntu Distribution Release: focal Distribution Type: gnome Distribution Arch: arm64 Install Type: EMMC Final Image: VIM3L_Ubuntu-gnome-focal_Linux-4.9_arm64_EMMC_V1.0.8-211216.img Compressed Image: VIM3L_Ubuntu-gnome-focal_Linux-4.9_arm64_EMMC_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1124171] Info: Start new build session ../fenix.build/build.pid [1124171] Info: Cleanup old build session Info: Build host: focal target: focal [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[21/31]: VIM3L-ubuntu-gnome-focal-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 19 = 00:00:19 %%TEST[22/31]: VIM3L-ubuntu-server-focal-vendor-sdusb-REL release STARTING [Thu 16 Dec 2021 10:58:31 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM3L LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM3L LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM3L Uboot Version: 2015.01 Uboot Configuration: kvim3l_defconfig Uboot Branch: khadas-vims-v2015.01 Linux Version: 4.9 Linux Configuration: kvims_defconfig Linux DTB: arch/arm64/boot/dts/amlogic/kvim3l_linux.dtb Linux Branch: khadas-vims-4.9.y Distribution: Ubuntu Distribution Release: focal Distribution Type: server Distribution Arch: arm64 Install Type: SD-USB Final Image: VIM3L_Ubuntu-server-focal_Linux-4.9_arm64_SD-USB_V1.0.8-211216.img Compressed Image: VIM3L_Ubuntu-server-focal_Linux-4.9_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1124344] Info: Start new build session ../fenix.build/build.pid [1124344] Info: Cleanup old build session Info: Build host: focal target: focal [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[22/31]: VIM3L-ubuntu-server-focal-vendor-sdusb-REL == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 20 = 00:00:20 %%TEST[23/31]: VIM3L-ubuntu-gnome-focal-vendor-sdusb-REL release STARTING [Thu 16 Dec 2021 10:58:32 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM3L LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=gnome DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM3L LINUX=4.9 UBOOT=2015.01 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=gnome DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM3L Uboot Version: 2015.01 Uboot Configuration: kvim3l_defconfig Uboot Branch: khadas-vims-v2015.01 Linux Version: 4.9 Linux Configuration: kvims_defconfig Linux DTB: arch/arm64/boot/dts/amlogic/kvim3l_linux.dtb Linux Branch: khadas-vims-4.9.y Distribution: Ubuntu Distribution Release: focal Distribution Type: gnome Distribution Arch: arm64 Install Type: SD-USB Final Image: VIM3L_Ubuntu-gnome-focal_Linux-4.9_arm64_SD-USB_V1.0.8-211216.img Compressed Image: VIM3L_Ubuntu-gnome-focal_Linux-4.9_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1124516] Info: Start new build session ../fenix.build/build.pid [1124516] Info: Cleanup old build session Info: Build host: focal target: focal [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[23/31]: VIM3L-ubuntu-gnome-focal-vendor-sdusb-REL == ERROR exit_code: 2 duration: 0 = 00:00:00 total: 20 = 00:00:20 %%TEST[24/31]: VIM3L-ubuntu-server-focal-mainline-sdusb-REL-TEST release STARTING [Thu 16 Dec 2021 10:58:32 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM3L LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM3L LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM3L Uboot Version: mainline Uboot Configuration: khadas-vim3l_defconfig Uboot Branch: master Linux Version: mainline Linux Configuration: defconfig Linux DTB: arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dtb Linux Branch: master Distribution: Ubuntu Distribution Release: focal Distribution Type: server Distribution Arch: arm64 Install Type: SD-USB Final Image: VIM3L_Ubuntu-server-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img Compressed Image: VIM3L_Ubuntu-server-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1124683] Info: Start new build session ../fenix.build/build.pid [1124683] Info: Cleanup old build session Info: Build host: focal target: focal [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[24/31]: VIM3L-ubuntu-server-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 21 = 00:00:21 %%TEST[25/31]: VIM3L-ubuntu-gnome-focal-mainline-sdusb-REL-TEST release STARTING [Thu 16 Dec 2021 10:58:33 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=VIM3L LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=gnome DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=VIM3L LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=gnome DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: VIM3L Uboot Version: mainline Uboot Configuration: khadas-vim3l_defconfig Uboot Branch: master Linux Version: mainline Linux Configuration: defconfig Linux DTB: arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dtb Linux Branch: master Distribution: Ubuntu Distribution Release: focal Distribution Type: gnome Distribution Arch: arm64 Install Type: SD-USB Final Image: VIM3L_Ubuntu-gnome-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img Compressed Image: VIM3L_Ubuntu-gnome-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1124850] Info: Start new build session ../fenix.build/build.pid [1124850] Info: Cleanup old build session Info: Build host: focal target: focal [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[25/31]: VIM3L-ubuntu-gnome-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 22 = 00:00:22 %%TEST[26/31]: Edge-ubuntu-server-bionic-vendor-emmc-REL-CHK release STARTING [Thu 16 Dec 2021 10:58:34 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=Edge LINUX=4.4 UBOOT=2017.09 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=Edge LINUX=4.4 UBOOT=2017.09 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: Edge Uboot Version: 2017.09 Uboot Configuration: kedge_defconfig Uboot Branch: khadas-edge-v2017.09 Linux Version: 4.4 Linux Configuration: kedge_defconfig Linux DTB: arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-linux.dtb Linux Branch: khadas-edge-4.4.y Distribution: Ubuntu Distribution Release: bionic Distribution Type: server Distribution Arch: arm64 Install Type: EMMC Final Image: Edge_Ubuntu-server-bionic_Linux-4.4_arm64_EMMC_V1.0.8-211216.img Compressed Image: Edge_Ubuntu-server-bionic_Linux-4.4_arm64_EMMC_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1125019] Info: Start new build session ../fenix.build/build.pid [1125019] Info: Cleanup old build session Info: Build host: focal target: bionic [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[26/31]: Edge-ubuntu-server-bionic-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 23 = 00:00:23 %%TEST[27/31]: Edge-ubuntu-lxde-bionic-vendor-emmc-REL-CHK release STARTING [Thu 16 Dec 2021 10:58:35 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=Edge LINUX=4.4 UBOOT=2017.09 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=lxde DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=Edge LINUX=4.4 UBOOT=2017.09 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=lxde DISTRIB_ARCH=arm64 INSTALL_TYPE=EMMC COMPRESS_IMAGE=yes INSTALL_TYPE_RAW=no Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: Edge Uboot Version: 2017.09 Uboot Configuration: kedge_defconfig Uboot Branch: khadas-edge-v2017.09 Linux Version: 4.4 Linux Configuration: kedge_defconfig Linux DTB: arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-linux.dtb Linux Branch: khadas-edge-4.4.y Distribution: Ubuntu Distribution Release: bionic Distribution Type: lxde Distribution Arch: arm64 Install Type: EMMC Final Image: Edge_Ubuntu-lxde-bionic_Linux-4.4_arm64_EMMC_V1.0.8-211216.img Compressed Image: Edge_Ubuntu-lxde-bionic_Linux-4.4_arm64_EMMC_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1125188] Info: Start new build session ../fenix.build/build.pid [1125188] Info: Cleanup old build session Info: Build host: focal target: bionic [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[27/31]: Edge-ubuntu-lxde-bionic-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 24 = 00:00:24 %%TEST[28/31]: Edge-ubuntu-server-bionic-vendor-sdusb-REL release STARTING [Thu 16 Dec 2021 10:58:36 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=Edge LINUX=4.4 UBOOT=2017.09 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=Edge LINUX=4.4 UBOOT=2017.09 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: Edge Uboot Version: 2017.09 Uboot Configuration: kedge_defconfig Uboot Branch: khadas-edge-v2017.09 Linux Version: 4.4 Linux Configuration: kedge_defconfig Linux DTB: arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-linux.dtb Linux Branch: khadas-edge-4.4.y Distribution: Ubuntu Distribution Release: bionic Distribution Type: server Distribution Arch: arm64 Install Type: SD-USB Final Image: Edge_Ubuntu-server-bionic_Linux-4.4_arm64_SD-USB_V1.0.8-211216.img Compressed Image: Edge_Ubuntu-server-bionic_Linux-4.4_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1125356] Info: Start new build session ../fenix.build/build.pid [1125356] Info: Cleanup old build session Info: Build host: focal target: bionic [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[28/31]: Edge-ubuntu-server-bionic-vendor-sdusb-REL == ERROR exit_code: 2 duration: 0 = 00:00:00 total: 24 = 00:00:24 %%TEST[29/31]: Edge-ubuntu-lxde-bionic-vendor-sdusb-REL release STARTING [Thu 16 Dec 2021 10:58:36 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=Edge LINUX=4.4 UBOOT=2017.09 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=lxde DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=Edge LINUX=4.4 UBOOT=2017.09 DISTRIBUTION=Ubuntu DISTRIB_RELEASE=bionic DISTRIB_TYPE=lxde DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: Edge Uboot Version: 2017.09 Uboot Configuration: kedge_defconfig Uboot Branch: khadas-edge-v2017.09 Linux Version: 4.4 Linux Configuration: kedge_defconfig Linux DTB: arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-linux.dtb Linux Branch: khadas-edge-4.4.y Distribution: Ubuntu Distribution Release: bionic Distribution Type: lxde Distribution Arch: arm64 Install Type: SD-USB Final Image: Edge_Ubuntu-lxde-bionic_Linux-4.4_arm64_SD-USB_V1.0.8-211216.img Compressed Image: Edge_Ubuntu-lxde-bionic_Linux-4.4_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1125525] Info: Start new build session ../fenix.build/build.pid [1125525] Info: Cleanup old build session Info: Build host: focal target: bionic [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[29/31]: Edge-ubuntu-lxde-bionic-vendor-sdusb-REL == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 25 = 00:00:25 %%TEST[30/31]: Edge-ubuntu-server-focal-mainline-sdusb-REL-TEST release STARTING [Thu 16 Dec 2021 10:58:37 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=Edge LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=Edge LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=server DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: Edge Uboot Version: mainline Uboot Configuration: khadas-edge-captain-rk3399_defconfig Uboot Branch: master Linux Version: mainline Linux Configuration: defconfig Linux DTB: arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtb Linux Branch: master Distribution: Ubuntu Distribution Release: focal Distribution Type: server Distribution Arch: arm64 Install Type: SD-USB Final Image: Edge_Ubuntu-server-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img Compressed Image: Edge_Ubuntu-server-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1125688] Info: Start new build session ../fenix.build/build.pid [1125688] Info: Cleanup old build session Info: Build host: focal target: focal [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[30/31]: Edge-ubuntu-server-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 26 = 00:00:26 %%TEST[31/31]: Edge-ubuntu-gnome-focal-mainline-sdusb-REL-TEST release STARTING [Thu 16 Dec 2021 10:58:38 AM CST] 1120455 == ENV CONFIG ======================= VERSION=1.0.8 KHADAS_BOARD=Edge LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=gnome DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes == ONE LINE CONFIG ================== source scripts/tests/../../env/setenv.sh -q -s KHADAS_BOARD=Edge LINUX=mainline UBOOT=mainline DISTRIBUTION=Ubuntu DISTRIB_RELEASE=focal DISTRIB_TYPE=gnome DISTRIB_ARCH=arm64 INSTALL_TYPE=SD-USB COMPRESS_IMAGE=yes Environment setup done. Type 'make' to build. make: Entering directory '/home/build/actions-runner/_work/fenix/fenix' [i] FENIX (scripts/create_image.sh) BUILD: /home/build/actions-runner/_work/fenix/fenix.build | DL: /home/build/actions-runner/_work/fenix/fenix.dl | sudo: sudo -E [i] no ask mode was auto detected [i] no ask ( noninteractive ) mode activated BUILD_TYPE : release DOWNLOAD_MIRROR : default NO_CCACHE : no COMPRESS_IMAGE : yes INSTALL_TYPE_RAW : no CLONE_FULL_COMMIT_LOG : yes FORCE_BUILD_KERNEL_DEB : yes SKIP_ROOTFS_CACHE_DOWNLOAD : yes FORCE_CREATE_ROOTFS_CACHE : no CREATE_ROOTFS_CACHE_ONLY : no ***********************PARAMETERS************************ Fenix Version: 1.0.8 Khadas Board: Edge Uboot Version: mainline Uboot Configuration: khadas-edge-captain-rk3399_defconfig Uboot Branch: master Linux Version: mainline Linux Configuration: defconfig Linux DTB: arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtb Linux Branch: master Distribution: Ubuntu Distribution Release: focal Distribution Type: gnome Distribution Arch: arm64 Install Type: SD-USB Final Image: Edge_Ubuntu-gnome-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img Compressed Image: Edge_Ubuntu-gnome-focal_Linux-5.16-rc2_arm64_SD-USB_V1.0.8-211216.img.xz ********************************************************* Info: Check active build session ../fenix.build/build.pid [1125851] Info: Start new build session ../fenix.build/build.pid [1125851] Info: Cleanup old build session Info: Build host: focal target: focal [i] check python -> Python 2.7.18 [i] check python2 -> Python 2.7.18 Info: Try to update fenix:master From https://github.com/khadas/fenix * branch master -> FETCH_HEAD Already up to date. From https://github.com/khadas/fenix ! [rejected] v1.0.8 -> v1.0.8 (would clobber existing tag) make: *** [Makefile:2: all] Error 1 make: Leaving directory '/home/build/actions-runner/_work/fenix/fenix' %%TEST[31/31]: Edge-ubuntu-gnome-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 1 = 00:00:01 total: 27 = 00:00:27 %%SUMMARY_BEGIN: %%TEST[1/31]: Install-deps == OK duration: 1 = 00:00:01 %%TEST[2/31]: VIM1-ubuntu-server-bionic-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 3 = 00:00:03 %%TEST[3/31]: VIM1-ubuntu-xfce-bionic-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[4/31]: VIM1-ubuntu-server-bionic-vendor-sdusb-REL == ERROR exit_code: 2 duration: 0 = 00:00:00 %%TEST[5/31]: VIM1-ubuntu-xfce-bionic-vendor-sdusb-REL == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[6/31]: VIM1-ubuntu-server-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[7/31]: VIM1-ubuntu-gnome-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[8/31]: VIM2-ubuntu-server-bionic-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[9/31]: VIM2-ubuntu-xfce-bionic-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 0 = 00:00:00 %%TEST[10/31]: VIM2-ubuntu-server-bionic-vendor-sdusb-REL == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[11/31]: VIM2-ubuntu-xfce-bionic-vendor-sdusb-REL == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[12/31]: VIM2-ubuntu-server-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[13/31]: VIM2-ubuntu-gnome-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[14/31]: VIM3-ubuntu-server-focal-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 0 = 00:00:00 %%TEST[15/31]: VIM3-ubuntu-gnome-focal-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[16/31]: VIM3-ubuntu-server-focal-vendor-sdusb-REL == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[17/31]: VIM3-ubuntu-gnome-focal-vendor-sdusb-REL == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[18/31]: VIM3-ubuntu-server-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[19/31]: VIM3-ubuntu-gnome-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 0 = 00:00:00 %%TEST[20/31]: VIM3L-ubuntu-server-focal-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[21/31]: VIM3L-ubuntu-gnome-focal-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[22/31]: VIM3L-ubuntu-server-focal-vendor-sdusb-REL == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[23/31]: VIM3L-ubuntu-gnome-focal-vendor-sdusb-REL == ERROR exit_code: 2 duration: 0 = 00:00:00 %%TEST[24/31]: VIM3L-ubuntu-server-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[25/31]: VIM3L-ubuntu-gnome-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[26/31]: Edge-ubuntu-server-bionic-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[27/31]: Edge-ubuntu-lxde-bionic-vendor-emmc-REL-CHK == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[28/31]: Edge-ubuntu-server-bionic-vendor-sdusb-REL == ERROR exit_code: 2 duration: 0 = 00:00:00 %%TEST[29/31]: Edge-ubuntu-lxde-bionic-vendor-sdusb-REL == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[30/31]: Edge-ubuntu-server-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 1 = 00:00:01 %%TEST[31/31]: Edge-ubuntu-gnome-focal-mainline-sdusb-REL-TEST == ERROR exit_code: 2 duration: 1 = 00:00:01 %%SUMMARY_END: %%TESTS[]: total: 31 ok: 1 fail: 30 skip: 0 duration: 27 = 00:00:27 [Thu 16 Dec 2021 10:58:39 AM CST]