Name ANGLE_d3d_texture_client_buffer Name Strings EGL_ANGLE_d3d_texture_client_buffer Contributors Geoff Lang Olli Etuaho Sunny Sachanandani Contacts Geoff Lang, Google Inc. (geofflang 'at' google.com) Status Draft Version Version 6, May 12, 2020 Number EGL Extension #?? Dependencies This extension is written against the wording of the EGL 1.2 Specification. References the EGL_ANGLE_device_d3d and EGL_KHR_image_base extensions. Overview This extension allows creating EGL surfaces and EGL images from D3D texture objects. New Types None New Procedures and Functions None New Tokens Accepted by the parameter of eglCreateImageKHR and parameter of eglCreatePbufferFromClientBuffer: EGL_D3D_TEXTURE_ANGLE 0x33A3 Additions to Chapter 2 of the EGL 1.2 Specification (EGL Operation) Add to section 2.5.1 "EGLImage Specification" (as defined by the EGL_KHR_image_base specification), in the description of eglCreateImageKHR: "Values accepted for are listed in Table aaa, below. +----------------------------+-----------------------------------------+ | | Notes | +----------------------------+-----------------------------------------+ | EGL_D3D_TEXTURE_ANGLE | Used for Direct3D11 texture objects | +----------------------------+-----------------------------------------+ Table aaa. Legal values for eglCreateImageKHR parameter ... If is EGL_D3D_TEXTURE_ANGLE, must be a valid display, must be EGL_NO_CONTEXT, must be a pointer to a valid D3D11 texture object (cast into the type EGLClientBuffer), and attributes other than EGL_TEXTURE_INTERNAL_FORMAT_ANGLE, EGL_TEXTURE_OFFSET_X_ANGLE, or EGL_TEXTURE_OFFSET_Y_ANGLE are ignored. The width and height of the pbuffer are determined by the width and height of . If EGL_TEXTURE_INTERNAL_FORMAT_ANGLE is specified, it is used to interpret according to the provided internal format. See table egl.restrictions for acceptable texture object types and formats. If EGL_D3D11_TEXTURE_PLANE_ANGLE is specified, it is used to access the specified plane of . See table egl.restrictions for acceptable values. If EGL_D3D11_TEXTURE_ARRAY_SLICE_ANGLE is specified, it is used to access the specified array slice of the texture array . If EGL_TEXTURE_OFFSET_X_ANGLE or EGL_TEXTURE_OFFSET_Y_ANGLE are specified, they must be non-negative and are used to offset all rendering into the surface including blits, clears and draws. If the EGL_ANGLE_device_d3d extension is present, the provided D3D11 texture object must have been created by the same D3D11 device queried from the display. If these requirements are not met, an EGL_BAD_PARAMETER error is generated." Additions to Chapter 3 of the EGL 1.2 Specification (EGL Functions and Errors) Replace the last sentence of paragraph 1 of Section 3.5.3 with the following text. "Currently, the only client API resources which may be bound in this fashion are OpenVG VGImage objects and Direct3D texture objects." Replace the last sentence of paragraph 2 ("To bind a client API...") of Section 3.5.3 with the following text. "When is EGL_OPENVG_IMAGE or EGL_D3D_TEXTURE_ANGLE, the width and height of the pbuffer are determined by the width and height of ." Replace the third paragraph of Section 3.5.3 with the following text. " specifies the type of buffer to be bound. The only allowed values of are EGL_OPENVG_IMAGE and EGL_D3D_TEXTURE_ANGLE". Append the following text to the fourth paragraph of Section 3.5.3. "When is EGL_D3D_TEXTURE_ANGLE, must be a valid D3D texture object, cast into the type EGLClientBuffer. See table egl.restrictions for acceptable texture object types and formats. If the EGL_ANGLE_device_d3d extension is present, the provided D3D texture object must have been created by the same D3D device queried from the display. If these requirements are not met, an EGL_BAD_PARAMETER error is generated." --------------------------------------------------------------------------- Resource Type Resource Restrictions --------------------------------------------------------------------------- IDirect3DTexture9 Memory pool must be D3DPOOL_DEFAULT. Format must be D3DFMT_R8G8B8, D3DFMT_A8R8G8B8, D3DFMT_A16B16G16R16F or D3DFMT_A32B32G32R32F. EGL_TEXTURE_INTERNAL_FORMAT_ANGLE is not supported. EGL_TEXTURE_OFFSET_X_ANGLE and EGL_TEXTURE_OFFSET_Y_ANGLE are not supported. ID3D11Texture2D Usage flags must be D3D11_USAGE_DEFAULT. Format must be DXGI_FORMAT_R8G8B8A8_UNORM, DXGI_FORMAT_R8G8B8A8_UNORM_SRGB, DXGI_FORMAT_B8G8R8A8_UNORM, DXGI_FORMAT_B8G8R8A8_UNORM_SRGB (support is optional), DXGI_FORMAT_R8G8B8A8_TYPELESS (support is optional), DXGI_FORMAT_B8G8R8A8_TYPELESS (support is optional), DXGI_FORMAT_R16G16B16A16_FLOAT, DXGI_FORMAT_R32G32B32A32_FLOAT, DXGI_FORMAT_R10G10B10A2_UNORM, DXGI_FORMAT_R8_UNORM, DXGI_FORMAT_R16_UNORM, DXGI_FORMAT_R8G8_UNORM, DXGI_FORMAT_R16G16_UNORM, DXGI_FORMAT_NV12, DXGI_FORMAT_P010, or DXGI_FORMAT_P016. EGL_D3D11_TEXTURE_PLANE_ANGLE must be specified for YUV formats DXGI_FORMAT_NV12, DXGI_FORMAT_P010, or DXGI_FORMAT_P016, and must be 0 or 1. It is ignored for all non-YUV formats. EGL_TEXTURE_INTERNAL_FORMAT_ANGLE (if specified) must be GL_RGBA (supported for all RGBA and BGRA formats), GL_RGB (supported for all RGBA and BGRA formats except DXGI_FORMAT_R10G10B10A2_UNORM), GL_BGRA_EXT (supported only for DXGI_FORMAT_B8G8R8A8_UNORM, DXGI_FORMAT_B8G8R8A8_UNORM_SRGB, and DXGI_FORMAT_B8G8R8A8_TYPELESS), GL_RGB10_A2_EXT (supported for DXGI_FORMAT_R10G10B10A2_UNORM), GL_RED_EXT (supported for DXGI_FORMAT_R8_UNORM and DXGI_FORMAT_R16_UNORM), GL_RG_EXT (supported for DXGI_FORMAT_R8G8_UNORM and DXGI_FORMAT_R16G16_UNORM), GL_R16_EXT (supported for DXGI_FORMAT_R16_UNORM), or GL_RG16_EXT (supported for DXGI_FORMAT_R16G16_UNORM). It is ignored for all YUV formats. -------------------------------------------------------------------------- Table egl.restrictions - Restrictions on D3D resources that can be used as a . -------------------------------------------------------------------------- Append to the fifth paragraph of Section 3.5.3. "In addition, in case buftype is EGL_D3D_TEXTURE_ANGLE and the D3D resource has a typeless DXGI format, attrib_list may contain the attribute EGL_GL_COLORSPACE." Append to the end of Section 3.5.3. "When a pbuffer is created with type EGL_D3D_TEXTURE_ANGLE, the contents of the associcated D3D texture object are undefined while the pbuffer is the current read surface, draw surface or bound to a client texture." Append to the end of Section 3.5.3. "When a pbuffer is created with type EGL_D3D_TEXTURE_ANGLE, and the EGL_GL_COLORSPACE attribute is not specified in attrib_list, the EGL_GL_COLORSPACE attribute of the surface is determined by the DXGI format of the Direct3D texture. For *_SRGB DXGI formats, the value of EGL_GL_COLORSPACE is EGL_GL_COLORSPACE_SRGB. For other formats including *_TYPELESS DXGI formats, the value of EGL_GL_COLORSPACE defaults to EGL_GL_COLORSPACE_LINEAR." Issues 1. What renderers allow the use of a multi-sampled texture? PROPOSED: Multi-sampled texture support is currently limited to D3D11. Additionally, the client is responsible for resolving the texture. 2. How does this extension interact with EXT_sRGB_write_control? If GL_FRAMEBUFFER_SRGB_EXT is disabled and a pbuffer created from a D3D texture with an *_SRGB format is being rendered to, it is undefined whether SRGB conversion will be performed. 3. What renderers allow the use of typeless textures? PROPOSED: Support for typeless textures is currently limited to D3D11. 4. Can RGB formats be supported? RESOLVED: RGB internal formats are supported for creating images from D3D11 textures in version 5 by setting EGL_TEXTURE_INTERNAL_FORMAT_ANGLE attribute to GL_RGB. Images with an RGB format will ensure that the alpha channel of the texture is reset to 1.0 when it is used. 5. What operations do the texture offsets affect? RESOLVED: The texture offsets specified by EGL_TEXTURE_OFFSET_X_ANGLE and EGL_TEXTURE_OFFSET_Y_ANGLE affect only rendering into the surface. Specifically these affect the internal D3D viewport and scissor rect states for draws, clears, and blits. This is needed to apply the update offset returned by calling BeginDraw() on IDCompositionSurface, and is needed for correct rendering in that case. Revision History Version 9, 2021/09/07 - added support for R/RG formats and GL_RGB10_A2_EXT. Version 8, 2021/01/13 - added support for texture array. Version 7, 2021/01/12 - added support for NV12/P010/P016 planar formats. Version 6, 2020/05/12 - added support for specifying texture offsets. Version 5, 2019/09/06 - added support for creating EGLImage. Version 4, 2019/04/15 - added support for DXGI_FORMAT_R10G10B10A2_UNORM. Version 3, 2018/01/23 - added support for typeless textures. Version 2, 2018/01/15 - clarified SRGB conversion handling. Version 1, 2016/10/05 - first draft.