# Android permissions for system developers This document targets system developers. App developers should refer to the [public documentation](https://developer.android.com/guide/topics/permissions/overview). ## Definitions Each app (often called package) has a unique name called package name. Each package has a manifest file describing properties of the package. The android system server is in a special package named "android". When a package gets installed the package is (usually) assigned a unique identifier called [uid ](../os/Users.md#int-uid). This is the same as a uid in Linux, but this often leads to confusion. It is easiest to see a uid as a unique identifier for a package. Usually an app is running in a container called a process. Each process has a unique id called pid, but unlike the uid the pid changes each time the process is restarted and app that are not currently running don't have a pid. The process container makes sure that other apps cannot negatively interact with an app. Processes can only interact via controlled interactions called remote procedure calls (RPCs). Android’s RPC mechanism is called _Binder_. As no app code can be trusted the permission need to be checked on the receiving side of the Binder call. For more details please take a look at [Android's security model](../os/Users.md#security-model). ## Permissions for regular apps ### Install time permissions The purpose of install time permissions is to control access to APIs where it does not makes sense to involve the user. This can be either because the API is not sensitive, or because additional checks exist. Another benefit of install time permissions is that is becomes very easy to monitor which apps can access certain APIs. E.g. by checking which apps have the `android.permission.INTERNET` permission you can list all apps that are allowed to use APIs that can send data to the internet. #### Defining a permission Any package can define a permission. For that it simply adds an entry in the manifest file `` Any package can do this, including the system package. When talking about [permissions for system apps](#permissions-for-system-apps) we will see that it is important which package defines a permission. It is common good practice to prefix the permission name with the package name to avoid collisions. #### Requesting a permission Any app can request any permission via adding an entry in the manifest file like `` A requested permission does not necessarily mean that the permission is granted. When and how a permission is granted depends on the protection level of the permission. If no protection level is set, the permission will always be granted. Such "normal" permissions can still be useful as it will be easy to find apps using a certain functionality on app stores and by checking `dumpsys package`. #### Checking a permission `Context.checkPermission(permission, pid, uid)` returns if the pid/uid has the permission. By far the most common case is to check the permission on the receiving end of a binder call. In this case the pid can be read as `Binder.callingPid()` and the uid as `Binder.callingUid()`. The uid is a mandatory argument as permissions are maintained per uid. The pid can be set to -1 if not pid is available. The context class contains handy wrappers for `checkPermission`, such as `enforeCallingPermission` which calls checkPermission with `Binder.callingPid`/`Binder.callingUid` and throws a SecurityException when the permission is not granted. #### Verifying an app has an install time permission In `dumpsys package my.package.name` there are two sections. In requested permissions all permissions of the `uses-permission` tags are listed. In install permission the permissions with their grant state are listed. If an install time permission is not listed here, it is not granted. ``` Packages: Package [com.android.packageinstaller] (2eb7062): userId=10071 [...] requested permissions: android.permission.MANAGE_USERS android.permission.INSTALL_PACKAGES android.permission.DELETE_PACKAGES android.permission.READ_INSTALL_SESSIONS android.permission.RECEIVE_BOOT_COMPLETED android.permission.HIDE_NON_SYSTEM_OVERLAY_WINDOWS android.permission.USE_RESERVED_DISK android.permission.UPDATE_APP_OPS_STATS android.permission.MANAGE_APP_OPS_MODES android.permission.INTERACT_ACROSS_USERS_FULL android.permission.SUBSTITUTE_NOTIFICATION_APP_NAME android.permission.PACKAGE_USAGE_STATS install permissions: android.permission.USE_RESERVED_DISK: granted=true android.permission.INSTALL_PACKAGES: granted=true android.permission.RECEIVE_BOOT_COMPLETED: granted=true android.permission.INTERACT_ACROSS_USERS_FULL: granted=true android.permission.PACKAGE_USAGE_STATS: granted=true android.permission.SUBSTITUTE_NOTIFICATION_APP_NAME: granted=true android.permission.READ_INSTALL_SESSIONS: granted=true android.permission.MANAGE_USERS: granted=true android.permission.HIDE_NON_SYSTEM_OVERLAY_WINDOWS: granted=true android.permission.MANAGE_APP_OPS_MODES: granted=true android.permission.UPDATE_APP_OPS_STATS: granted=true android.permission.DELETE_PACKAGES: granted=true ``` #### End-to-end: Protecting an RPC call via a permission ##### Service Manifest ```xml ``` ##### Service code ```kotlin class MyService : Service() { override fun onBind(intent: Intent?): IBinder? { return object : IMyService.Stub() { override fun doSomething() { // Verify that calling UID has the permission enforceCallingPermission( "com.android.example.myservice.MY_PERMISSION", "Need to hold permission" ) // do something } }.asBinder() } } ``` ##### Caller Manifest ```xml ``` ### Runtime permissions Runtime permission must be granted by the user during runtime. This is needed if the API protects data or functionality that is sensitive for the user. E.g. the users current location is protected by a runtime permission. Users want a system that is secure and privacy focused by default. User can also often not make a good choice when asked at the wrong time without enough context. Hence in general runtime permissions should be avoided and the API should be built in a way where no private data needs to be leaked. #### Defining a runtime permission Runtime permissions are defined in the same way as install time permissions. To tag them as runtime permissions the `protectionLevel` needs to be set to dangerous. Dangerous is a synonym for runtime permissions in the Android platform. ```xml ``` #### Requesting a runtime permission Similar to install time permissions any app can request a runtime permission by adding the `` to the manifest. By default runtime permissions are not granted. The app needs to call `Activity.requestPermissions` during runtime to ask the user for the permission. The user might then grant or deny and once the decision is made the activity is called by via `Activity.onPermissionGranted`. During development and testing a runtime permission can be granted via the `pm` shell command or by using the `UiAutomator.grantRuntimePermission` API call. Please note that this does _not_ grant the [app-op](#runtime-permissions-and-app_ops) synchronously. Unless the app needs to test the actual permission grant flow it is recommended to grant the runtime permissions during install using `adb install -g /my/package.apk`. #### Checking a runtime permission For runtime permissions defined by 3rd party apps it is fine to check a runtime permission like an install time permission. For system defined permissions you need to check all runtime permissions by using the `PermissionChecker` utility. It is good practice to use the tool anywhere possible. The permission checker might return `PERMISSION_DENIED_APP_OP` which should lead to a silent failure. This can only happen for system defined runtime permissions. ##### Runtime permissions and app-ops > See [App-ops](../app/AppOps.md). The PermissionChecker code fundamentally looks like this: ```kotlin class PermissionChecker { fun checkCallingPermission(context: Context, permission: String) { if (isRuntimePermission(permission)) { if (context.checkPermission(uid, permission) == DENIED) { return PERMISSION_DENIED } val appOpOfPermission = AppOpsManager.permissionToOp(permission) if (appOpOfPermission == null) { // not platform defined return PERMISSION_GRANTED } val appOpMode = appOpsManager.noteOp(appOpOfPermission) if (appOpMode == AppOpsManager.MODE_ALLOWED) { return PERMISSION_GRANTED } else { return PERMISSION_DENIED_APP_OP } } else { return PERMISSION_DENIED } } } ``` For each platform defined runtime permission there is a matching app-op. When calling `AppOpsManager.noteOp` this returns either `MODE_ALLOWED` or `MODE_IGNORED`. This value is then used to decide between `PERMISSION_DENIED_APP_OP` and `PERMISSION_GRANTED`. The primary purpose of the special `PERMISSION_DENIED_APP_OP` state was to support apps targeting an SDK lower than 23. These apps do not understand the concept of denied runtime permissions. Hence they would crash when getting a `SecurityException`. To protect the users' privacy while still not crashing the app the special `PERMISSION_DENIED_APP_OP` mandates that the API should somehow silently fail. A secondary use case of the `AppOpsManager.noteOp` calls is to [track](../app/AppOps.md#app_ops-for-tracking) which apps perform what runtime protected actions. #### Verifying an app has a runtime time permission In `dumpsys package my.package.name` the runtime permissions are listed per uid. I.e. different users might have different runtime permission grants and shared uids share a grant-set. If a runtime permission is listed as requested but not in the runtime permission section it is in its initial state, i.e. not granted. ``` Packages: Package [com.google.android.GoogleCamera] (ccb6af): userId=10181 [...] requested permissions: android.permission.ACCESS_COARSE_LOCATION android.permission.ACCESS_FINE_LOCATION android.permission.ACCESS_NETWORK_STATE android.permission.ACCESS_NOTIFICATION_POLICY android.permission.ACCESS_WIFI_STATE android.permission.BIND_WALLPAPER android.permission.CAMERA android.permission.CHANGE_WIFI_STATE android.permission.INTERNET android.permission.GET_PACKAGE_SIZE android.permission.NFC android.permission.READ_SYNC_SETTINGS android.permission.RECEIVE_BOOT_COMPLETED android.permission.RECORD_AUDIO android.permission.SET_WALLPAPER android.permission.USE_CREDENTIALS android.permission.VIBRATE android.permission.WAKE_LOCK android.permission.WRITE_EXTERNAL_STORAGE [ ... ] android.permission.WRITE_SETTINGS android.permission.WRITE_SYNC_SETTINGS com.google.android.elmyra.permission.CONFIGURE_ASSIST_GESTURE com.google.android.providers.gsf.permission.READ_GSERVICES android.permission.FOREGROUND_SERVICE com.google.android.googlequicksearchbox.permission.LENSVIEW_BROADCAST android.permission.READ_EXTERNAL_STORAGE [ ... ] [...] User 0: [ ... ] overlay paths: runtime permissions: android.permission.ACCESS_FINE_LOCATION: granted=false [ ... ] android.permission.READ_EXTERNAL_STORAGE: granted=true [ ... ] android.permission.ACCESS_COARSE_LOCATION: granted=false [ ... ] android.permission.CAMERA: granted=true [ ... ] android.permission.WRITE_EXTERNAL_STORAGE: granted=true [ ... ] android.permission.RECORD_AUDIO: granted=true[ ... ] ``` #### End-to-end: Protecting an RPC call via a runtime permission ##### Service Manifest ```xml ``` ##### Service code ```kotlin class MyService : Service() { override fun onBind(intent: Intent?): IBinder? { return object : IMyService.Stub() { override fun doSomething(callingPackage: String?, callingFeatureId: String?) { Objects.requireNonNull(callingPackageName) // Verify that calling UID has the permission when (run { PermissionChecker.checkCallingPermission( this@MyService, "com.android.example.myservice.MY_RUNTIME_PERMISSION", callingPackageName, callingFeatureId, "Did something" ) }) { PERMISSION_GRANTED -> /* do something */ PERMISSION_DENIED_APP_OP -> /* silent failure, do nothing */ else -> throw SecurityException( "Cannot do something as caller is missing " + "com.android.example.myservice.MY_RUNTIME_PERMISSION" ) } } }.asBinder() } } ``` ##### Caller Manifest ```xml ``` ##### Caller code ```kotlin class MyActivity : Activity { fun callDoSomething() { if (checkSelfPermission("com.android.example.myservice.MY_RUNTIME_PERMISSION") == PERMISSION_DENIED) { // Interrupt operation and request permission requestPermissions(arrayOf("com.android.example.myservice.MY_RUNTIME_PERMISSION"), 23) } else { myService.doSomething(this@MyActivity.opPackageName, this@MyActivity.featureId) } } override fun onRequestPermissionsResult( requestCode: Int, permissions: Array, grantResults: IntArray ) { if (requestCode == 23 && grantResults[0] == PERMISSION_GRANTED) { // Finish operation callDoSomething() } } } ``` #### Restricted permissions Some runtime permissions are restricted. They are annotated in the platforms `AndroidManifest.xml` as `hardRestricted` or `softRestricted`. Restricted permissions behave uncommon when not whitelisted. When whitelisted the permissions behave normally. What uncommon means depends on the whether they are hard or soft restricted. They can either be whitelisted during upgrade P->Q by the system or need to be whitelisted by the installer via `PackageInstaller.SessionParams.setWhitelistedRestrictedPermissions`. If this method is not used all permissions will be whitelisted. Afterwards the app that originally installed the app can change the whitelisting state via `PackageManager.addWhitelistedRestrictedPermission` and `PackageManager.removeWhitelistedRestrictedPermission`. The system tracks the source of the whitelisting by having three different flags `RESTRICTION_SYSTEM_EXEMPT`, `RESTRICTION_UPGRADE_EXEMPT`, and `RESTRICTION_INSTALLER_EXEMPT`, The flags can be checked in `dumpsys package my.package.name` ``` User 0: [...] runtime permissions: android.permission.READ_EXTERNAL_STORAGE: granted=false, flags=[ RESTRICTION_UPGRADE_EXEMPT ] android.permission.ACCESS_FINE_LOCATION: granted=true, flags=[ RESTRICTION_SYSTEM_EXEMPT|RESTRICTION_UPGRADE_EXEMPT ] ``` ##### Hard restricted Hard restricted permissions need to be whitelisted to be grant-able. ##### Soft restricted The behavior of non-whitelisted soft restricted permissions is not uniform. The behavior is defined in the `SoftRestrictedPermissionPolicy`. #### System fixed permission Some runtime permissions are required for normal operation of the device. In this case the system can grant the permission as `SYSTEM_FIXED`. In this case the permission can be seen in the [permission management settings](#settings) but cannot be revoked by the user. The flag can be checked in `dumpsys package my.package.name` ``` User 0: [...] runtime permissions: android.permission.READ_EXTERNAL_STORAGE: granted=true, flags=[ SYSTEM_FIXED|GRANTED_BY_DEFAULT ] ``` #### Background access Whether the app is currently visible to the user is reflected in the `ActivityManager`'s proc state. There is a lot of granularity to this, but runtime permissions are using the [app-ops services' ](../app/AppOps.md) definition of foreground and background. Most runtime permissions are not affected by foreground/background-ness. Microphone and Camera are foreground-only while Location is usually foreground-only, but background access can be added by granting the `ACCESS_BACKGROUND_LOCATION` modifier runtime permission. ##### Microphone and Camera Currently these only allow access while the app is in foreground. There is a manual whitelist for e.g. the voice interaction service. This is currently (Mar 2020) reworked and will behave like [location](#location) soon. ##### Location As described [above](#runtime-permissions-and-app_ops) the app-op mode for granted permissions is `MODE_ALLOWED` to allow access or `MODE_IGNORED` to suppress access. The important case is the case where the permission is granted and the app-op is `MODE_IGNORED`. In the case of location this state causes the `LocationManagerService` to stop delivering locations to the app. This is not a breaking behavior as the same scenario happens if e.g. no satellites could be found. This behavior is used to implement the foregound/background behavior for location. If the app is in the foreground the app-op mode is `MODE_ALLOWED` and works normally. If the app goes into background the app-op mode changes to `MODE_IGNORED`. This means that locations are delivered while the app is in foreground and while the app is background, the app won't get any locations. The automatic switching between `MODE_ALLOWED` and `MODE_IGNORED` is done inside of [`AppOpsManager`](../app/AppOps.md#foreground). Background access can be enabled by also granting the `ACCESS_BACKGROUND_LOCATION` to the app. In this case the app-op mode will always be `MODE_ALLOWED`. #### UI ##### Granting An app following the best practices does not ask for any runtime permissions until absolutely needed. Once needed the request should be made in context. I.e. the user should understand from the current state of the app and the user's action why the request is made. E.g. if the user presses a "show me the next ATM"-button the user is most likely expecting a request for the location permission. This is central premise to the runtime permission UI. It is the app's responsibility to avoid showing permission requests dialogs to the user which might get denied. These dialogs are not meant to be user-choices, they are meant to be user-confirmations. Hence any denied permission dialog is probably due to the app asking for permissions the user does not expect. If too many permission requests get denied the app is apparently trying to get more than the user wants to give to the app. In this case the permission gets permanently denied and all future requests will be denied automatically without showing a UI. `Context.requestPermission` calls for more than one permission are allowed and might result in multiple dialogs in sequence. This might make sense for e.g. getting microphone and camera permission when starting a video call. Each time the the user makes a choice (either to grant or the deny) a permission request the permission is marked as `USER_SET`. If a permission gets permanently denied the permission is marked as `USER_FIXED`. This can be found in `dumpsys package my.package.name` ``` User 0: [...] runtime permissions: android.permission.READ_EXTERNAL_STORAGE: granted=false, flags=[ USER_SET|USER_FIXED ] android.permission.ACCESS_FINE_LOCATION: granted=true, flags=[ USER_SET ] ``` ##### Settings By far most interactions with the permission system are via the [permission grant flow](#granting). The main purpose of the permission settings is to show the user the previous choices and allow the user to revisit previous choices. In reality few users do that. ##### Grouping There are too many runtime permissions for the user to individually manage. Hence the UI bundles the permissions into groups. **Apps should never assume the grouping**. The grouping might change with SDK updates, but also at any other time. Certain form factors or locales might use other permission models and sometimes some of the permissions of a group cannot be granted for various reasons. The grouping is defined inside the permission controller app. If two permissions belong to a group and the first permission is already granted the second one will be granted on request of the app without user interaction. For that reason a permission group with at least one individual permission granted will show up as granted in the UI. ##### Alternate permission management It is not allowed to build alternate permission management UIs. While restricting innovation is not a good choice this is a required one to enforce a consistent, predictable, but flexible permission model for users and app developers. Further some data needed for permission management (e.g. the grouping) is not available outside the permission controller app. Hence all permission management UI needs to be integrated with AOSP. #### Pre granting Runtime permissions protect user private data. It is a violation of user trust to give the data to an app without explicit user consent (i.e. the user [granting](#granting) the permission). Still the user expects certain functionality (e.g. receiving a phone call) to work out of the box. Hence the `DefaultPermissionGrantPolicy` and roles allow to grant permission without the user . The default permission grant policy grants permissions for three categories of apps - Apps running in well defined [uids](../os/Users.md#int-uid) as they are considered as part of the platform - Apps that are in certain predefined categories, e.g. the browser and the SMS app. This is meant for the most basic phone functionality, not for all pre-installed apps. - Apps that are explicitly mentioned as pre-grant-exceptions. This is meant to be used for setup and other highly critical use cases, not to improve the user experience. The exceptions are listed in xml files in `etc/` and follow the following syntax ```xml ``` Pre-granted runtime permissions can still be revoked by the user in [settings](#settings) unless they are granted as `SYSTEM_FIXED`. Whether a permission was granted by the default can be checked in the permission flags of `dumpsys package my.package.name` ``` User 0: [...] runtime permissions: android.permission.ACCESS_FINE_LOCATION: granted=true, flags=[ GRANTED_BY_DEFAULT ] ``` ### Permission restricted components As [publicly documented](https://developer.android.com/guide/topics/permissions/overview#permission_enforcement) it is possible to restrict starting an activity/binding to a service by using permission. It is a common pattern to - define a permission in the platform as `signature` - protect a service in an app by this permission using the `android:permission` attribute of the `` tag Then it is guaranteed that only the system can bind to such service. This is used for services that provide extensions to platform functionality, such as auto-fill services, print services, and accessibility services. This does not work for app-op or runtime permissions as the way to check these permissions is more complex than install time permissions. #### End-to-end A service only the system can bind to Make sure to set the `android:permission` flag for this service. As developers can forget this it is a good habit to check this before binding to the service. This makes sure that the services are implemented correctly and no random app can bind to the service. The result is that the permission is granted only to the system. It is not granted to the service's package, but this has no negative side-effects. ##### Permission definition frameworks/base/core/res/AndroidManifest.xml: ```xml [...] [...] ``` ##### Service definition Manifest of the service providing the functionality: ```xml ``` ##### System server code binding to service ```kotlin val serviceConnections = mutableListOf() val potentialServices = context.packageManager.queryIntentServicesAsUser( Intent("android.my.Service"), GET_SERVICES or GET_META_DATA, userId) for (val ri in potentialServices) { val serviceComponent = ComponentName(ri.serviceInfo.packageName, ri.serviceInfo.name) if (android.Manifest.permission.BIND_MY_SERVICE != ri.serviceInfo.permission) { Slog.w(TAG, "$serviceComponent is not protected by " + "${android.Manifest.permission.BIND_MY_SERVICE}") continue } val newConnection = object : ServiceConnection { ... } val wasBound = context.bindServiceAsUser(Intent().setComponent(serviceComponent), serviceConnection, BIND_AUTO_CREATE, UserHandle.of(userId)) if (wasBound) { serviceConnections.add(newConnection) } } ``` ## Permissions for system apps System apps need to integrate deeper with the system than regular apps. Hence they need to be able to call APIs not available to other apps. This is implemented by granting permissions to these system apps and then enforcing the permissions in the API similar to other [install time permissions](#checking-a-permission). System apps are not different from regular apps, but the protection levels (e.g. [privileged](#privileged-permissions), [preinstalled](#preinstalled-permissions)) mentioned in this section are more commonly used by system apps. ### Multiple permission levels It is possible to assign multiple protection levels to a permission. Very common combinations are for example adding `signature` to all permissions to make sure the platform signed apps can be granted the permission, e.g. `privileged|signature`. The permission will be granted if the app qualifies for _any_ of the permission levels. ### App-op permissions > See [App-ops](../app/AppOps.md). App-op permissions are user-switchable permissions that are not runtime permissions. This should be used for permissions that are really only meant to be ever granted to a very small amount of apps. Traditionally granting these permissions is intentionally very heavy weight so that the user really needs to understand the use case. For example one use case is the `INTERACT_ACROSS_PROFILES` permission that allows apps of different users within the same [profile group](../os/Users.md#profile-group) to interact. Of course this is breaking a very basic security container and hence should only ever be granted with a lot of care. **Warning:** Most app-op permissions follow this logic, but most of them also have exceptions and special behavior. Hence this section is a guideline, not a rule. #### Defining an app-op permission Only the platform can reasonably define an app-op permission. The permission is defined in the platforms manifest using the `appop` protection level ```xml ``` Almost always the protection level is app-op | something else, like [signature](#signature-permissions) (in the case above) or [privileged](#privileged-permissions). #### Checking an app-op permission The `PermissionChecker` utility can check app-op permissions with the [same syntax as runtime permissions](#checking-a-runtime-permission). The permission checker internally follows this flow ```kotlin class PermissionChecker { fun checkCallingPermission(context: Context, permission: String) { if (isAppOpPermission(permission)) { val appopOfPermission = AppOpsManager.permissionToOp(permission) if (appopOfPermission == null) { // not platform defined return PERMISSION_DENIED } val appopMode = appOpsManager.noteOp(appopOfPermission) when (appopMode) { AppOpsManager.MODE_ALLOWED -> return PERMISSION_GRANTED AppOpsManager.MODE_IGNORED -> return PERMISSION_DENIED AppOpsManager.MODE_DEFAULT -> { if (context.checkPermission(uid, permission) == GRANTED) { return PERMISSION_GRANTED } else { return PERMISSION_DENIED } } } } else { return PERMISSION_DENIED } } } ``` #### Granting an app-op permission The permission's grant state is only considered if the app-op's mode is `MODE_DEFAULT`. This allows to have default grants while still being overridden by the app-op. The permission is then granted by setting the app-op mode. This is usually done via dedicated APIs for each use case. Similarly whether and how an app can request the permission is different for each app-op permission. When implementing a new app-op permission, make sure to set the app-op mode using `AppOpsManager.setUidMode` to make sure the permission is granted on the uid as this is the security domain. During development app-ops can be grated to app via the `appops set` shell command. E.g. ``` adb shell appops set 10187 INTERACT_ACROSS_PROFILES allow ``` sets the `INTERACT_ACROSS_PROFILES` app-op for uid 10187 to allow thereby granting apps in this uid the ability to interact across profiles. ##### UI Most UIs for app-op permissions are in the "Special app access" section of the settings app. In most cases the permission should only be granted with the user's explicit agreement, usually by allowing the app to directly open the "Special app access" page for this permission and app. To repeat: this is a guideline for app-op permissions and there are many exceptions. ### Signature permissions Only apps signed with the defining app's certificate will be granted the permission. This is used to restrict APIs to apps of the same developer. This is frequently used to restrict permissions defined by the platform to apps also signed with the platform's certificate. As this is a very tight restriction this is recommended for permissions that are only used by apps built out of AOSP which are signed with the platform certificate. Please note that OEMs sign their platform themselves. I.e. OEMs can implement new apps using these permissions. It is unlikely that 3rd party apps will be able to use APIs protected by signature permissions as they are usually not signed with the platform certificate. If possible, [role protected permissions](#role-protected-permissions) should also be considered as an alternative to better restrict which apps may get the permission. Such permissions are defined and checked like an install time permission. ### Preinstalled permissions This means that the app has to be pre-installed. There is no restriction what apps are pre-installed on a particular device install there. Hence it can be really any app including 3rd party apps. Hence this permission level is discouraged unless there are [further restrictions](#restricted-by-tests). If possible, [role protected permissions](#role-protected-permissions) should also be considered as an alternative to better restrict which apps may get the permission. Such permissions are defined and checked like an install time permission. ### Privileged permissions This means that the app has to be pre-installed and in the `system/priv` directory in the filesystem. There is no restriction what apps are in this directory on a particular device. Hence it can be really any app including 3rd party apps. An app is only ever granted privileged permissions requested by the pre-installed apk. I.e. privileged permissions added in updates will never be granted. Hence this permission level is discouraged unless there are [further restrictions](#restricted-by-tests). If possible, [role protected permissions](#role-protected-permissions) should also be considered as an alternative to better restrict which apps may get the permission. Such permissions are defined and checked like an install time permission. #### Restricted by tests As all apps that might get preinstalled or privilidged permissions need to be pre-installed and new images need to pass compliance tests it is possible to use a test to whitelist the apps that can request the permission. Example of such a test: ```kotlin /* Add new whitelisted packages to this list */ private val whitelistedPkgs = listOf("my.whitelisted.package") @Test fun onlySomeAppsAreAllowedToHavePermissionGranted() { assertThat(whitelistedPkgs).containsAtLeastElementsIn( context.packageManager.getInstalledPackages(MATCH_ALL) .filter { pkg -> context.checkPermission(android.Manifest.permission.MY_PRIVILEGED_PERMISSION, -1, pkg.applicationInfo.uid) == PERMISSION_GRANTED /* The permission is defined by the system and hence granted to it */ }.filter { pkg -> pkg.applicationInfo.uid != SYSTEM_UID } .map { it.packageName } ) } ``` #### Whitelist As mentioned above it is not suggested, but still common practice to install 3rd party apps as privileged. To verify and restrict which privileged permissions those apps get granted all privileged permissions need to be explicitly whitelisted in a file `/etc`. ```xml ``` If the pre-installed apk of an app requests a privileged permission that is not mentioned in any whitelist or that is not denied the system will refuse to boot. As mentioned above privileged permissions added in updates to the pre-installed app will never be granted. ### Limited permissions E.g. installer, wellbeing, documenter, etc... This allows the system to restrict the permission to a well defined app or set of apps. It is possible to add new types in `PackageManagerService`. Which apps qualify for such a permission level is flexible and custom for each such level. Usually they refer to a single or small set of apps, usually - but not always - apps defined in AOSP. This type of permission is deprecated in favor of [role protected permissions](#role-protected-permissions). These permissions are defined and checked like an install time permission. ### Role protected permissions See [Using role for permission protection](../../../../../../packages/modules/Permission/PermissionController/src/com/android/permissioncontroller/role/RolePermissionProtection.md). ### Development permissions > Not recommended By adding the `development` protection level to any permissions the permission can be granted via the `pm grant` shell command. This appears to be useful for development and testing, but it is very highly discouraged. Any user can grant them permanently via adb, hence adding this tag removes all guarantees the permission might otherwise provide. ### Other protection levels There are other levels (such as `runtime`) but they are for special purposes on should not be used by platform developers.