Next: GDB/MI Variable Objects, Previous: GDB/MI Program Execution, Up: GDB/MI [Contents][Index]
-enable-frame-filters Command-enable-frame-filters
GDB allows Python-based frame filters to affect the output of the MI commands relating to stack traces. As there is no way to implement this in a fully backward-compatible way, a front end must request that this functionality be enabled.
Once enabled, this feature cannot be disabled.
Note that if Python support has not been compiled into GDB, this command will still succeed (and do nothing).
-stack-info-frame Command-stack-info-frame
Get info on the selected frame.
The corresponding GDB command is ‘info frame’ or ‘frame’ (without arguments).
(gdb)
-stack-info-frame
^done,frame={level="1",addr="0x0001076c",func="callee3",
file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="17",
arch="i386:x86_64"}
(gdb)
-stack-info-depth Command-stack-info-depth [ max-depth ]
Return the depth of the stack. If the integer argument max-depth is specified, do not count beyond max-depth frames.
There’s no equivalent GDB command.
For a stack with frame levels 0 through 11:
(gdb) -stack-info-depth ^done,depth="12" (gdb) -stack-info-depth 4 ^done,depth="4" (gdb) -stack-info-depth 12 ^done,depth="12" (gdb) -stack-info-depth 11 ^done,depth="11" (gdb) -stack-info-depth 13 ^done,depth="12" (gdb)
-stack-list-arguments Command -stack-list-arguments [ --no-frame-filters ] [ --skip-unavailable ] print-values
[ low-frame high-frame ]
Display a list of the arguments for the frames between low-frame and high-frame (inclusive). If low-frame and high-frame are not provided, list the arguments for the whole call stack. If the two arguments are equal, show the single frame at the corresponding level. It is an error if low-frame is larger than the actual number of frames. On the other hand, high-frame may be larger than the actual number of frames, in which case only existing frames will be returned.
If print-values is 0 or --no-values, print only the names of
the variables; if it is 1 or --all-values, print also their
values; and if it is 2 or --simple-values, print the name,
type and value for simple data types, and the name and type for arrays,
structures and unions. If the option --no-frame-filters is
supplied, then Python frame filters will not be executed.
If the --skip-unavailable option is specified, arguments that
are not available are not listed. Partially available arguments
are still displayed, however.
Use of this command to obtain arguments in a single frame is deprecated in favor of the ‘-stack-list-variables’ command.
GDB does not have an equivalent command. gdbtk has a
‘gdb_get_args’ command which partially overlaps with the
functionality of ‘-stack-list-arguments’.
(gdb)
-stack-list-frames
^done,
stack=[
frame={level="0",addr="0x00010734",func="callee4",
file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="8",
arch="i386:x86_64"},
frame={level="1",addr="0x0001076c",func="callee3",
file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="17",
arch="i386:x86_64"},
frame={level="2",addr="0x0001078c",func="callee2",
file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="22",
arch="i386:x86_64"},
frame={level="3",addr="0x000107b4",func="callee1",
file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="27",
arch="i386:x86_64"},
frame={level="4",addr="0x000107e0",func="main",
file="../../../devo/gdb/testsuite/gdb.mi/basics.c",
fullname="/home/foo/bar/devo/gdb/testsuite/gdb.mi/basics.c",line="32",
arch="i386:x86_64"}]
(gdb)
-stack-list-arguments 0
^done,
stack-args=[
frame={level="0",args=[]},
frame={level="1",args=[name="strarg"]},
frame={level="2",args=[name="intarg",name="strarg"]},
frame={level="3",args=[name="intarg",name="strarg",name="fltarg"]},
frame={level="4",args=[]}]
(gdb)
-stack-list-arguments 1
^done,
stack-args=[
frame={level="0",args=[]},
frame={level="1",
args=[{name="strarg",value="0x11940 \"A string argument.\""}]},
frame={level="2",args=[
{name="intarg",value="2"},
{name="strarg",value="0x11940 \"A string argument.\""}]},
{frame={level="3",args=[
{name="intarg",value="2"},
{name="strarg",value="0x11940 \"A string argument.\""},
{name="fltarg",value="3.5"}]},
frame={level="4",args=[]}]
(gdb)
-stack-list-arguments 0 2 2
^done,stack-args=[frame={level="2",args=[name="intarg",name="strarg"]}]
(gdb)
-stack-list-arguments 1 2 2
^done,stack-args=[frame={level="2",
args=[{name="intarg",value="2"},
{name="strarg",value="0x11940 \"A string argument.\""}]}]
(gdb)
-stack-list-frames Command-stack-list-frames [ --no-frame-filters low-frame high-frame ]
List the frames currently on the stack. For each frame it displays the following info:
The frame number, 0 being the topmost frame, i.e., the innermost function.
The $pc value for that frame.
Function name.
File name of the source file where the function lives.
The full file name of the source file where the function lives.
Line number corresponding to the $pc.
The shared library where this function is defined. This is only given if the frame’s function is not known.
Frame’s architecture.
If invoked without arguments, this command prints a backtrace for the
whole stack. If given two integer arguments, it shows the frames whose
levels are between the two arguments (inclusive). If the two arguments
are equal, it shows the single frame at the corresponding level. It is
an error if low-frame is larger than the actual number of
frames. On the other hand, high-frame may be larger than the
actual number of frames, in which case only existing frames will be
returned. If the option --no-frame-filters is supplied, then
Python frame filters will not be executed.
The corresponding GDB commands are ‘backtrace’ and ‘where’.
Full stack backtrace:
(gdb)
-stack-list-frames
^done,stack=
[frame={level="0",addr="0x0001076c",func="foo",
file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="11",
arch="i386:x86_64"},
frame={level="1",addr="0x000107a4",func="foo",
file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
arch="i386:x86_64"},
frame={level="2",addr="0x000107a4",func="foo",
file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
arch="i386:x86_64"},
frame={level="3",addr="0x000107a4",func="foo",
file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
arch="i386:x86_64"},
frame={level="4",addr="0x000107a4",func="foo",
file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
arch="i386:x86_64"},
frame={level="5",addr="0x000107a4",func="foo",
file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
arch="i386:x86_64"},
frame={level="6",addr="0x000107a4",func="foo",
file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
arch="i386:x86_64"},
frame={level="7",addr="0x000107a4",func="foo",
file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
arch="i386:x86_64"},
frame={level="8",addr="0x000107a4",func="foo",
file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
arch="i386:x86_64"},
frame={level="9",addr="0x000107a4",func="foo",
file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
arch="i386:x86_64"},
frame={level="10",addr="0x000107a4",func="foo",
file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
arch="i386:x86_64"},
frame={level="11",addr="0x00010738",func="main",
file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="4",
arch="i386:x86_64"}]
(gdb)
Show frames between low_frame and high_frame:
(gdb)
-stack-list-frames 3 5
^done,stack=
[frame={level="3",addr="0x000107a4",func="foo",
file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
arch="i386:x86_64"},
frame={level="4",addr="0x000107a4",func="foo",
file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
arch="i386:x86_64"},
frame={level="5",addr="0x000107a4",func="foo",
file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
arch="i386:x86_64"}]
(gdb)
Show a single frame:
(gdb)
-stack-list-frames 3 3
^done,stack=
[frame={level="3",addr="0x000107a4",func="foo",
file="recursive2.c",fullname="/home/foo/bar/recursive2.c",line="14",
arch="i386:x86_64"}]
(gdb)
-stack-list-locals Command-stack-list-locals [ --no-frame-filters ] [ --skip-unavailable ] print-values
Display the local variable names for the selected frame. If
print-values is 0 or --no-values, print only the names of
the variables; if it is 1 or --all-values, print also their
values; and if it is 2 or --simple-values, print the name,
type and value for simple data types, and the name and type for arrays,
structures and unions. In this last case, a frontend can immediately
display the value of simple data types and create variable objects for
other data types when the user wishes to explore their values in
more detail. If the option --no-frame-filters is supplied, then
Python frame filters will not be executed.
If the --skip-unavailable option is specified, local variables
that are not available are not listed. Partially available local
variables are still displayed, however.
This command is deprecated in favor of the ‘-stack-list-variables’ command.
‘info locals’ in GDB, ‘gdb_get_locals’ in gdbtk.
(gdb)
-stack-list-locals 0
^done,locals=[name="A",name="B",name="C"]
(gdb)
-stack-list-locals --all-values
^done,locals=[{name="A",value="1"},{name="B",value="2"},
{name="C",value="{1, 2, 3}"}]
-stack-list-locals --simple-values
^done,locals=[{name="A",type="int",value="1"},
{name="B",type="int",value="2"},{name="C",type="int [3]"}]
(gdb)
-stack-list-variables Command-stack-list-variables [ --no-frame-filters ] [ --skip-unavailable ] print-values
Display the names of local variables and function arguments for the selected frame. If
print-values is 0 or --no-values, print only the names of
the variables; if it is 1 or --all-values, print also their
values; and if it is 2 or --simple-values, print the name,
type and value for simple data types, and the name and type for arrays,
structures and unions. If the option --no-frame-filters is
supplied, then Python frame filters will not be executed.
If the --skip-unavailable option is specified, local variables
and arguments that are not available are not listed. Partially
available arguments and local variables are still displayed, however.
(gdb)
-stack-list-variables --thread 1 --frame 0 --all-values
^done,variables=[{name="x",value="11"},{name="s",value="{a = 1, b = 2}"}]
(gdb)
-stack-select-frame Command-stack-select-frame framenum
Change the selected frame. Select a different frame framenum on the stack.
This command in deprecated in favor of passing the ‘--frame’ option to every command.
The corresponding GDB commands are ‘frame’, ‘up’, ‘down’, ‘select-frame’, ‘up-silent’, and ‘down-silent’.
(gdb) -stack-select-frame 2 ^done (gdb)
Next: GDB/MI Variable Objects, Previous: GDB/MI Program Execution, Up: GDB/MI [Contents][Index]