Close httplib2 connections.
delete(project, region, inPlaceSnapshot, requestId=None, x__xgafv=None)
Deletes the specified InPlaceSnapshot resource. Keep in mind that deleting a single inPlaceSnapshot might not necessarily delete all the data on that inPlaceSnapshot. If any data on the inPlaceSnapshot that is marked for deletion is needed for subsequent inPlaceSnapshots, the data will be moved to the next corresponding inPlaceSnapshot. For more information, see Deleting inPlaceSnapshots.
get(project, region, inPlaceSnapshot, x__xgafv=None)
Returns the specified InPlaceSnapshot resource in the specified region.
getIamPolicy(project, region, resource, optionsRequestedPolicyVersion=None, x__xgafv=None)
Gets the access control policy for a resource. May be empty if no such policy or resource exists.
insert(project, region, body=None, requestId=None, x__xgafv=None)
Creates an in-place snapshot in the specified region.
Retrieves the list of InPlaceSnapshot resources contained within the specified region.
list_next(previous_request, previous_response)
Retrieves the next page of results.
setIamPolicy(project, region, resource, body=None, x__xgafv=None)
Sets the access control policy on the specified resource. Replaces any existing policy.
setLabels(project, region, resource, body=None, requestId=None, x__xgafv=None)
Sets the labels on a inPlaceSnapshot in the given region. To learn more about labels, read the Labeling Resources documentation.
testIamPermissions(project, region, resource, body=None, x__xgafv=None)
Returns permissions that a caller has on the specified resource.
close()
Close httplib2 connections.
delete(project, region, inPlaceSnapshot, requestId=None, x__xgafv=None)
Deletes the specified InPlaceSnapshot resource. Keep in mind that deleting a single inPlaceSnapshot might not necessarily delete all the data on that inPlaceSnapshot. If any data on the inPlaceSnapshot that is marked for deletion is needed for subsequent inPlaceSnapshots, the data will be moved to the next corresponding inPlaceSnapshot. For more information, see Deleting inPlaceSnapshots.
Args:
project: string, Project ID for this request. (required)
region: string, The name of the region for this request. (required)
inPlaceSnapshot: string, Name of the InPlaceSnapshot resource to delete. (required)
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/alpha/globalOperations) * [Regional](/compute/docs/reference/rest/alpha/regionOperations) * [Zonal](/compute/docs/reference/rest/alpha/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zonalOperations` resource. For more information, read Global, Regional, and Zonal Resources.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
"user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
],
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
get(project, region, inPlaceSnapshot, x__xgafv=None)
Returns the specified InPlaceSnapshot resource in the specified region.
Args:
project: string, Project ID for this request. (required)
region: string, The name of the region for this request. (required)
inPlaceSnapshot: string, Name of the InPlaceSnapshot resource to return. (required)
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Represents a InPlaceSnapshot resource. You can use in-place snapshots to create disk rollback points quickly..
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"diskSizeGb": "A String", # [Output Only] Size of the source disk, specified in GB.
"guestFlush": True or False, # Specifies to create an application consistent in-place snapshot by informing the OS to prepare for the snapshot process. Currently only supported on Windows instances using the Volume Shadow Copy Service (VSS).
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"kind": "compute#inPlaceSnapshot", # [Output Only] Type of the resource. Always compute#inPlaceSnapshot for InPlaceSnapshot resources.
"labelFingerprint": "A String", # A fingerprint for the labels being applied to this InPlaceSnapshot, which is essentially a hash of the labels set used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update labels. You must always provide an up-to-date fingerprint hash in order to update or change labels, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make a get() request to retrieve a InPlaceSnapshot.
"labels": { # Labels to apply to this InPlaceSnapshot. These can be later modified by the setLabels method. Label values may be empty.
"a_key": "A String",
},
"name": "A String", # Name of the resource; provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"region": "A String", # [Output Only] URL of the region where the in-place snapshot resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource's resource id.
"sourceDisk": "A String", # URL of the source disk used to create this in-place snapshot. Note that the source disk must be in the same zone/region as the in-place snapshot to be created. This can be a full or valid partial URL. For example, the following are valid values: - https://www.googleapis.com/compute/v1/projects/project/zones/zone /disks/disk - projects/project/zones/zone/disks/disk - zones/zone/disks/disk
"sourceDiskId": "A String", # [Output Only] The ID value of the disk used to create this InPlaceSnapshot. This value may be used to determine whether the InPlaceSnapshot was taken from the current or a previous instance of a given disk name.
"status": "A String", # [Output Only] The status of the inPlaceSnapshot. This can be CREATING, DELETING, FAILED, or READY.
"zone": "A String", # [Output Only] URL of the zone where the in-place snapshot resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
}
getIamPolicy(project, region, resource, optionsRequestedPolicyVersion=None, x__xgafv=None)
Gets the access control policy for a resource. May be empty if no such policy or resource exists.
Args:
project: string, Project ID for this request. (required)
region: string, The name of the region for this request. (required)
resource: string, Name or id of the resource for this request. (required)
optionsRequestedPolicyVersion: integer, Requested IAM Policy version.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # An Identity and Access Management (IAM) policy, which specifies access controls for Google Cloud resources. A `Policy` is a collection of `bindings`. A `binding` binds one or more `members` to a single `role`. Members can be user accounts, service accounts, Google groups, and domains (such as G Suite). A `role` is a named list of permissions; each `role` can be an IAM predefined role or a user-created custom role. For some types of Google Cloud resources, a `binding` can also specify a `condition`, which is a logical expression that allows access to a resource only if the expression evaluates to `true`. A condition can add constraints based on attributes of the request, the resource, or both. To learn which resources support conditions in their IAM policies, see the [IAM documentation](https://cloud.google.com/iam/help/conditions/resource-policies). **JSON example:** { "bindings": [ { "role": "roles/resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", "group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@appspot.gserviceaccount.com" ] }, { "role": "roles/resourcemanager.organizationViewer", "members": [ "user:eve@example.com" ], "condition": { "title": "expirable access", "description": "Does not grant access after Sep 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", } } ], "etag": "BwWWja0YfJA=", "version": 3 } **YAML example:** bindings: - members: - user:mike@example.com - group:admins@example.com - domain:google.com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/resourcemanager.organizationAdmin - members: - user:eve@example.com role: roles/resourcemanager.organizationViewer condition: title: expirable access description: Does not grant access after Sep 2020 expression: request.time < timestamp('2020-10-01T00:00:00.000Z') etag: BwWWja0YfJA= version: 3 For a description of IAM and its features, see the [IAM documentation](https://cloud.google.com/iam/docs/).
"auditConfigs": [ # Specifies cloud audit logging configuration for this policy.
{ # Specifies the audit configuration for a service. The configuration determines which permission types are logged, and what identities, if any, are exempted from logging. An AuditConfig must have one or more AuditLogConfigs. If there are AuditConfigs for both `allServices` and a specific service, the union of the two AuditConfigs is used for that service: the log_types specified in each AuditConfig are enabled, and the exempted_members in each AuditLogConfig are exempted. Example Policy with multiple AuditConfigs: { "audit_configs": [ { "service": "allServices", "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE" }, { "log_type": "ADMIN_READ" } ] }, { "service": "sampleservice.googleapis.com", "audit_log_configs": [ { "log_type": "DATA_READ" }, { "log_type": "DATA_WRITE", "exempted_members": [ "user:aliya@example.com" ] } ] } ] } For sampleservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also exempts jose@example.com from DATA_READ logging, and aliya@example.com from DATA_WRITE logging.
"auditLogConfigs": [ # The configuration for logging of each type of permission.
{ # Provides the configuration for logging a type of permissions. Example: { "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE" } ] } This enables 'DATA_READ' and 'DATA_WRITE' logging, while exempting jose@example.com from DATA_READ logging.
"exemptedMembers": [ # Specifies the identities that do not cause logging for this type of permission. Follows the same format of Binding.members.
"A String",
],
"ignoreChildExemptions": True or False, # This is deprecated and has no effect. Do not use.
"logType": "A String", # The log type that this config enables.
},
],
"exemptedMembers": [ # This is deprecated and has no effect. Do not use.
"A String",
],
"service": "A String", # Specifies a service that will be enabled for audit logging. For example, `storage.googleapis.com`, `cloudsql.googleapis.com`. `allServices` is a special value that covers all services.
},
],
"bindings": [ # Associates a list of `members` to a `role`. Optionally, may specify a `condition` that determines how and when the `bindings` are applied. Each of the `bindings` must contain at least one member.
{ # Associates `members` with a `role`.
"bindingId": "A String", # This is deprecated and has no effect. Do not use.
"condition": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # The condition that is associated with this binding. If the condition evaluates to `true`, then this binding applies to the current request. If the condition evaluates to `false`, then this binding does not apply to the current request. However, a different role binding might grant the same role to one or more of the members in this binding. To learn which resources support conditions in their IAM policies, see the [IAM documentation](https://cloud.google.com/iam/help/conditions/resource-policies).
"description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
"location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
"title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
},
"members": [ # Specifies the identities requesting access for a Cloud Platform resource. `members` can have the following values: * `allUsers`: A special identifier that represents anyone who is on the internet; with or without a Google account. * `allAuthenticatedUsers`: A special identifier that represents anyone who is authenticated with a Google account or a service account. * `user:{emailid}`: An email address that represents a specific Google account. For example, `alice@example.com` . * `serviceAccount:{emailid}`: An email address that represents a service account. For example, `my-other-app@appspot.gserviceaccount.com`. * `group:{emailid}`: An email address that represents a Google group. For example, `admins@example.com`. * `deleted:user:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a user that has been recently deleted. For example, `alice@example.com?uid=123456789012345678901`. If the user is recovered, this value reverts to `user:{emailid}` and the recovered user retains the role in the binding. * `deleted:serviceAccount:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a service account that has been recently deleted. For example, `my-other-app@appspot.gserviceaccount.com?uid=123456789012345678901`. If the service account is undeleted, this value reverts to `serviceAccount:{emailid}` and the undeleted service account retains the role in the binding. * `deleted:group:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a Google group that has been recently deleted. For example, `admins@example.com?uid=123456789012345678901`. If the group is recovered, this value reverts to `group:{emailid}` and the recovered group retains the role in the binding. * `domain:{domain}`: The G Suite domain (primary) that represents all the users of that domain. For example, `google.com` or `example.com`.
"A String",
],
"role": "A String", # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`, or `roles/owner`.
},
],
"etag": "A String", # `etag` is used for optimistic concurrency control as a way to help prevent simultaneous updates of a policy from overwriting each other. It is strongly suggested that systems make use of the `etag` in the read-modify-write cycle to perform policy updates in order to avoid race conditions: An `etag` is returned in the response to `getIamPolicy`, and systems are expected to put that etag in the request to `setIamPolicy` to ensure that their change will be applied to the same version of the policy. **Important:** If you use IAM Conditions, you must include the `etag` field whenever you call `setIamPolicy`. If you omit this field, then IAM allows you to overwrite a version `3` policy with a version `1` policy, and all of the conditions in the version `3` policy are lost.
"iamOwned": True or False, # This is deprecated and has no effect. Do not use.
"rules": [ # This is deprecated and has no effect. Do not use.
{ # This is deprecated and has no effect. Do not use.
"action": "A String", # This is deprecated and has no effect. Do not use.
"conditions": [ # This is deprecated and has no effect. Do not use.
{ # This is deprecated and has no effect. Do not use.
"iam": "A String", # This is deprecated and has no effect. Do not use.
"op": "A String", # This is deprecated and has no effect. Do not use.
"svc": "A String", # This is deprecated and has no effect. Do not use.
"sys": "A String", # This is deprecated and has no effect. Do not use.
"values": [ # This is deprecated and has no effect. Do not use.
"A String",
],
},
],
"description": "A String", # This is deprecated and has no effect. Do not use.
"ins": [ # This is deprecated and has no effect. Do not use.
"A String",
],
"logConfigs": [ # This is deprecated and has no effect. Do not use.
{ # This is deprecated and has no effect. Do not use.
"cloudAudit": { # This is deprecated and has no effect. Do not use. # This is deprecated and has no effect. Do not use.
"authorizationLoggingOptions": { # This is deprecated and has no effect. Do not use. # This is deprecated and has no effect. Do not use.
"permissionType": "A String", # This is deprecated and has no effect. Do not use.
},
"logName": "A String", # This is deprecated and has no effect. Do not use.
},
"counter": { # This is deprecated and has no effect. Do not use. # This is deprecated and has no effect. Do not use.
"customFields": [ # This is deprecated and has no effect. Do not use.
{ # This is deprecated and has no effect. Do not use.
"name": "A String", # This is deprecated and has no effect. Do not use.
"value": "A String", # This is deprecated and has no effect. Do not use.
},
],
"field": "A String", # This is deprecated and has no effect. Do not use.
"metric": "A String", # This is deprecated and has no effect. Do not use.
},
"dataAccess": { # This is deprecated and has no effect. Do not use. # This is deprecated and has no effect. Do not use.
"logMode": "A String", # This is deprecated and has no effect. Do not use.
},
},
],
"notIns": [ # This is deprecated and has no effect. Do not use.
"A String",
],
"permissions": [ # This is deprecated and has no effect. Do not use.
"A String",
],
},
],
"version": 42, # Specifies the format of the policy. Valid values are `0`, `1`, and `3`. Requests that specify an invalid value are rejected. Any operation that affects conditional role bindings must specify version `3`. This requirement applies to the following operations: * Getting a policy that includes a conditional role binding * Adding a conditional role binding to a policy * Changing a conditional role binding in a policy * Removing any role binding, with or without a condition, from a policy that includes conditions **Important:** If you use IAM Conditions, you must include the `etag` field whenever you call `setIamPolicy`. If you omit this field, then IAM allows you to overwrite a version `3` policy with a version `1` policy, and all of the conditions in the version `3` policy are lost. If a policy does not include any conditions, operations on that policy may specify any valid version or leave the field unset. To learn which resources support conditions in their IAM policies, see the [IAM documentation](https://cloud.google.com/iam/help/conditions/resource-policies).
}
insert(project, region, body=None, requestId=None, x__xgafv=None)
Creates an in-place snapshot in the specified region.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region for this request. (required)
body: object, The request body.
The object takes the form of:
{ # Represents a InPlaceSnapshot resource. You can use in-place snapshots to create disk rollback points quickly..
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"diskSizeGb": "A String", # [Output Only] Size of the source disk, specified in GB.
"guestFlush": True or False, # Specifies to create an application consistent in-place snapshot by informing the OS to prepare for the snapshot process. Currently only supported on Windows instances using the Volume Shadow Copy Service (VSS).
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"kind": "compute#inPlaceSnapshot", # [Output Only] Type of the resource. Always compute#inPlaceSnapshot for InPlaceSnapshot resources.
"labelFingerprint": "A String", # A fingerprint for the labels being applied to this InPlaceSnapshot, which is essentially a hash of the labels set used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update labels. You must always provide an up-to-date fingerprint hash in order to update or change labels, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make a get() request to retrieve a InPlaceSnapshot.
"labels": { # Labels to apply to this InPlaceSnapshot. These can be later modified by the setLabels method. Label values may be empty.
"a_key": "A String",
},
"name": "A String", # Name of the resource; provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"region": "A String", # [Output Only] URL of the region where the in-place snapshot resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource's resource id.
"sourceDisk": "A String", # URL of the source disk used to create this in-place snapshot. Note that the source disk must be in the same zone/region as the in-place snapshot to be created. This can be a full or valid partial URL. For example, the following are valid values: - https://www.googleapis.com/compute/v1/projects/project/zones/zone /disks/disk - projects/project/zones/zone/disks/disk - zones/zone/disks/disk
"sourceDiskId": "A String", # [Output Only] The ID value of the disk used to create this InPlaceSnapshot. This value may be used to determine whether the InPlaceSnapshot was taken from the current or a previous instance of a given disk name.
"status": "A String", # [Output Only] The status of the inPlaceSnapshot. This can be CREATING, DELETING, FAILED, or READY.
"zone": "A String", # [Output Only] URL of the zone where the in-place snapshot resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/alpha/globalOperations) * [Regional](/compute/docs/reference/rest/alpha/regionOperations) * [Zonal](/compute/docs/reference/rest/alpha/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zonalOperations` resource. For more information, read Global, Regional, and Zonal Resources.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
"user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
],
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
list(project, region, filter=None, maxResults=None, orderBy=None, pageToken=None, returnPartialSuccess=None, x__xgafv=None)
Retrieves the list of InPlaceSnapshot resources contained within the specified region.
Args:
project: string, Project ID for this request. (required)
region: string, The name of the region for this request. (required)
filter: string, A filter expression that filters resources listed in the response. The expression must specify the field name, a comparison operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The comparison operator must be either `=`, `!=`, `>`, or `<`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ```
maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
pageToken: string, Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
returnPartialSuccess: boolean, Opt-in for partial success behavior which provides partial results in case of failure. The default value is false.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Contains a list of InPlaceSnapshot resources.
"id": "A String", # [Output Only] Unique identifier for the resource; defined by the server.
"items": [ # A list of InPlaceSnapshot resources.
{ # Represents a InPlaceSnapshot resource. You can use in-place snapshots to create disk rollback points quickly..
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"diskSizeGb": "A String", # [Output Only] Size of the source disk, specified in GB.
"guestFlush": True or False, # Specifies to create an application consistent in-place snapshot by informing the OS to prepare for the snapshot process. Currently only supported on Windows instances using the Volume Shadow Copy Service (VSS).
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"kind": "compute#inPlaceSnapshot", # [Output Only] Type of the resource. Always compute#inPlaceSnapshot for InPlaceSnapshot resources.
"labelFingerprint": "A String", # A fingerprint for the labels being applied to this InPlaceSnapshot, which is essentially a hash of the labels set used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update labels. You must always provide an up-to-date fingerprint hash in order to update or change labels, otherwise the request will fail with error 412 conditionNotMet. To see the latest fingerprint, make a get() request to retrieve a InPlaceSnapshot.
"labels": { # Labels to apply to this InPlaceSnapshot. These can be later modified by the setLabels method. Label values may be empty.
"a_key": "A String",
},
"name": "A String", # Name of the resource; provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"region": "A String", # [Output Only] URL of the region where the in-place snapshot resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource's resource id.
"sourceDisk": "A String", # URL of the source disk used to create this in-place snapshot. Note that the source disk must be in the same zone/region as the in-place snapshot to be created. This can be a full or valid partial URL. For example, the following are valid values: - https://www.googleapis.com/compute/v1/projects/project/zones/zone /disks/disk - projects/project/zones/zone/disks/disk - zones/zone/disks/disk
"sourceDiskId": "A String", # [Output Only] The ID value of the disk used to create this InPlaceSnapshot. This value may be used to determine whether the InPlaceSnapshot was taken from the current or a previous instance of a given disk name.
"status": "A String", # [Output Only] The status of the inPlaceSnapshot. This can be CREATING, DELETING, FAILED, or READY.
"zone": "A String", # [Output Only] URL of the zone where the in-place snapshot resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
},
],
"kind": "compute#inPlaceSnapshotList", # Type of resource.
"nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
"warning": { # [Output Only] Informational warning message.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
}
list_next(previous_request, previous_response)
Retrieves the next page of results.
Args:
previous_request: The request for the previous page. (required)
previous_response: The response from the request for the previous page. (required)
Returns:
A request object that you can call 'execute()' on to request the next
page. Returns None if there are no more items in the collection.
setIamPolicy(project, region, resource, body=None, x__xgafv=None)
Sets the access control policy on the specified resource. Replaces any existing policy.
Args:
project: string, Project ID for this request. (required)
region: string, The name of the region for this request. (required)
resource: string, Name or id of the resource for this request. (required)
body: object, The request body.
The object takes the form of:
{
"bindings": [ # Flatten Policy to create a backwacd compatible wire-format. Deprecated. Use 'policy' to specify bindings.
{ # Associates `members` with a `role`.
"bindingId": "A String", # This is deprecated and has no effect. Do not use.
"condition": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # The condition that is associated with this binding. If the condition evaluates to `true`, then this binding applies to the current request. If the condition evaluates to `false`, then this binding does not apply to the current request. However, a different role binding might grant the same role to one or more of the members in this binding. To learn which resources support conditions in their IAM policies, see the [IAM documentation](https://cloud.google.com/iam/help/conditions/resource-policies).
"description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
"location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
"title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
},
"members": [ # Specifies the identities requesting access for a Cloud Platform resource. `members` can have the following values: * `allUsers`: A special identifier that represents anyone who is on the internet; with or without a Google account. * `allAuthenticatedUsers`: A special identifier that represents anyone who is authenticated with a Google account or a service account. * `user:{emailid}`: An email address that represents a specific Google account. For example, `alice@example.com` . * `serviceAccount:{emailid}`: An email address that represents a service account. For example, `my-other-app@appspot.gserviceaccount.com`. * `group:{emailid}`: An email address that represents a Google group. For example, `admins@example.com`. * `deleted:user:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a user that has been recently deleted. For example, `alice@example.com?uid=123456789012345678901`. If the user is recovered, this value reverts to `user:{emailid}` and the recovered user retains the role in the binding. * `deleted:serviceAccount:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a service account that has been recently deleted. For example, `my-other-app@appspot.gserviceaccount.com?uid=123456789012345678901`. If the service account is undeleted, this value reverts to `serviceAccount:{emailid}` and the undeleted service account retains the role in the binding. * `deleted:group:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a Google group that has been recently deleted. For example, `admins@example.com?uid=123456789012345678901`. If the group is recovered, this value reverts to `group:{emailid}` and the recovered group retains the role in the binding. * `domain:{domain}`: The G Suite domain (primary) that represents all the users of that domain. For example, `google.com` or `example.com`.
"A String",
],
"role": "A String", # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`, or `roles/owner`.
},
],
"etag": "A String", # Flatten Policy to create a backward compatible wire-format. Deprecated. Use 'policy' to specify the etag.
"policy": { # An Identity and Access Management (IAM) policy, which specifies access controls for Google Cloud resources. A `Policy` is a collection of `bindings`. A `binding` binds one or more `members` to a single `role`. Members can be user accounts, service accounts, Google groups, and domains (such as G Suite). A `role` is a named list of permissions; each `role` can be an IAM predefined role or a user-created custom role. For some types of Google Cloud resources, a `binding` can also specify a `condition`, which is a logical expression that allows access to a resource only if the expression evaluates to `true`. A condition can add constraints based on attributes of the request, the resource, or both. To learn which resources support conditions in their IAM policies, see the [IAM documentation](https://cloud.google.com/iam/help/conditions/resource-policies). **JSON example:** { "bindings": [ { "role": "roles/resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", "group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@appspot.gserviceaccount.com" ] }, { "role": "roles/resourcemanager.organizationViewer", "members": [ "user:eve@example.com" ], "condition": { "title": "expirable access", "description": "Does not grant access after Sep 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", } } ], "etag": "BwWWja0YfJA=", "version": 3 } **YAML example:** bindings: - members: - user:mike@example.com - group:admins@example.com - domain:google.com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/resourcemanager.organizationAdmin - members: - user:eve@example.com role: roles/resourcemanager.organizationViewer condition: title: expirable access description: Does not grant access after Sep 2020 expression: request.time < timestamp('2020-10-01T00:00:00.000Z') etag: BwWWja0YfJA= version: 3 For a description of IAM and its features, see the [IAM documentation](https://cloud.google.com/iam/docs/). # REQUIRED: The complete policy to be applied to the 'resource'. The size of the policy is limited to a few 10s of KB. An empty policy is in general a valid policy but certain services (like Projects) might reject them.
"auditConfigs": [ # Specifies cloud audit logging configuration for this policy.
{ # Specifies the audit configuration for a service. The configuration determines which permission types are logged, and what identities, if any, are exempted from logging. An AuditConfig must have one or more AuditLogConfigs. If there are AuditConfigs for both `allServices` and a specific service, the union of the two AuditConfigs is used for that service: the log_types specified in each AuditConfig are enabled, and the exempted_members in each AuditLogConfig are exempted. Example Policy with multiple AuditConfigs: { "audit_configs": [ { "service": "allServices", "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE" }, { "log_type": "ADMIN_READ" } ] }, { "service": "sampleservice.googleapis.com", "audit_log_configs": [ { "log_type": "DATA_READ" }, { "log_type": "DATA_WRITE", "exempted_members": [ "user:aliya@example.com" ] } ] } ] } For sampleservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also exempts jose@example.com from DATA_READ logging, and aliya@example.com from DATA_WRITE logging.
"auditLogConfigs": [ # The configuration for logging of each type of permission.
{ # Provides the configuration for logging a type of permissions. Example: { "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE" } ] } This enables 'DATA_READ' and 'DATA_WRITE' logging, while exempting jose@example.com from DATA_READ logging.
"exemptedMembers": [ # Specifies the identities that do not cause logging for this type of permission. Follows the same format of Binding.members.
"A String",
],
"ignoreChildExemptions": True or False, # This is deprecated and has no effect. Do not use.
"logType": "A String", # The log type that this config enables.
},
],
"exemptedMembers": [ # This is deprecated and has no effect. Do not use.
"A String",
],
"service": "A String", # Specifies a service that will be enabled for audit logging. For example, `storage.googleapis.com`, `cloudsql.googleapis.com`. `allServices` is a special value that covers all services.
},
],
"bindings": [ # Associates a list of `members` to a `role`. Optionally, may specify a `condition` that determines how and when the `bindings` are applied. Each of the `bindings` must contain at least one member.
{ # Associates `members` with a `role`.
"bindingId": "A String", # This is deprecated and has no effect. Do not use.
"condition": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # The condition that is associated with this binding. If the condition evaluates to `true`, then this binding applies to the current request. If the condition evaluates to `false`, then this binding does not apply to the current request. However, a different role binding might grant the same role to one or more of the members in this binding. To learn which resources support conditions in their IAM policies, see the [IAM documentation](https://cloud.google.com/iam/help/conditions/resource-policies).
"description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
"location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
"title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
},
"members": [ # Specifies the identities requesting access for a Cloud Platform resource. `members` can have the following values: * `allUsers`: A special identifier that represents anyone who is on the internet; with or without a Google account. * `allAuthenticatedUsers`: A special identifier that represents anyone who is authenticated with a Google account or a service account. * `user:{emailid}`: An email address that represents a specific Google account. For example, `alice@example.com` . * `serviceAccount:{emailid}`: An email address that represents a service account. For example, `my-other-app@appspot.gserviceaccount.com`. * `group:{emailid}`: An email address that represents a Google group. For example, `admins@example.com`. * `deleted:user:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a user that has been recently deleted. For example, `alice@example.com?uid=123456789012345678901`. If the user is recovered, this value reverts to `user:{emailid}` and the recovered user retains the role in the binding. * `deleted:serviceAccount:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a service account that has been recently deleted. For example, `my-other-app@appspot.gserviceaccount.com?uid=123456789012345678901`. If the service account is undeleted, this value reverts to `serviceAccount:{emailid}` and the undeleted service account retains the role in the binding. * `deleted:group:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a Google group that has been recently deleted. For example, `admins@example.com?uid=123456789012345678901`. If the group is recovered, this value reverts to `group:{emailid}` and the recovered group retains the role in the binding. * `domain:{domain}`: The G Suite domain (primary) that represents all the users of that domain. For example, `google.com` or `example.com`.
"A String",
],
"role": "A String", # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`, or `roles/owner`.
},
],
"etag": "A String", # `etag` is used for optimistic concurrency control as a way to help prevent simultaneous updates of a policy from overwriting each other. It is strongly suggested that systems make use of the `etag` in the read-modify-write cycle to perform policy updates in order to avoid race conditions: An `etag` is returned in the response to `getIamPolicy`, and systems are expected to put that etag in the request to `setIamPolicy` to ensure that their change will be applied to the same version of the policy. **Important:** If you use IAM Conditions, you must include the `etag` field whenever you call `setIamPolicy`. If you omit this field, then IAM allows you to overwrite a version `3` policy with a version `1` policy, and all of the conditions in the version `3` policy are lost.
"iamOwned": True or False, # This is deprecated and has no effect. Do not use.
"rules": [ # This is deprecated and has no effect. Do not use.
{ # This is deprecated and has no effect. Do not use.
"action": "A String", # This is deprecated and has no effect. Do not use.
"conditions": [ # This is deprecated and has no effect. Do not use.
{ # This is deprecated and has no effect. Do not use.
"iam": "A String", # This is deprecated and has no effect. Do not use.
"op": "A String", # This is deprecated and has no effect. Do not use.
"svc": "A String", # This is deprecated and has no effect. Do not use.
"sys": "A String", # This is deprecated and has no effect. Do not use.
"values": [ # This is deprecated and has no effect. Do not use.
"A String",
],
},
],
"description": "A String", # This is deprecated and has no effect. Do not use.
"ins": [ # This is deprecated and has no effect. Do not use.
"A String",
],
"logConfigs": [ # This is deprecated and has no effect. Do not use.
{ # This is deprecated and has no effect. Do not use.
"cloudAudit": { # This is deprecated and has no effect. Do not use. # This is deprecated and has no effect. Do not use.
"authorizationLoggingOptions": { # This is deprecated and has no effect. Do not use. # This is deprecated and has no effect. Do not use.
"permissionType": "A String", # This is deprecated and has no effect. Do not use.
},
"logName": "A String", # This is deprecated and has no effect. Do not use.
},
"counter": { # This is deprecated and has no effect. Do not use. # This is deprecated and has no effect. Do not use.
"customFields": [ # This is deprecated and has no effect. Do not use.
{ # This is deprecated and has no effect. Do not use.
"name": "A String", # This is deprecated and has no effect. Do not use.
"value": "A String", # This is deprecated and has no effect. Do not use.
},
],
"field": "A String", # This is deprecated and has no effect. Do not use.
"metric": "A String", # This is deprecated and has no effect. Do not use.
},
"dataAccess": { # This is deprecated and has no effect. Do not use. # This is deprecated and has no effect. Do not use.
"logMode": "A String", # This is deprecated and has no effect. Do not use.
},
},
],
"notIns": [ # This is deprecated and has no effect. Do not use.
"A String",
],
"permissions": [ # This is deprecated and has no effect. Do not use.
"A String",
],
},
],
"version": 42, # Specifies the format of the policy. Valid values are `0`, `1`, and `3`. Requests that specify an invalid value are rejected. Any operation that affects conditional role bindings must specify version `3`. This requirement applies to the following operations: * Getting a policy that includes a conditional role binding * Adding a conditional role binding to a policy * Changing a conditional role binding in a policy * Removing any role binding, with or without a condition, from a policy that includes conditions **Important:** If you use IAM Conditions, you must include the `etag` field whenever you call `setIamPolicy`. If you omit this field, then IAM allows you to overwrite a version `3` policy with a version `1` policy, and all of the conditions in the version `3` policy are lost. If a policy does not include any conditions, operations on that policy may specify any valid version or leave the field unset. To learn which resources support conditions in their IAM policies, see the [IAM documentation](https://cloud.google.com/iam/help/conditions/resource-policies).
},
}
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # An Identity and Access Management (IAM) policy, which specifies access controls for Google Cloud resources. A `Policy` is a collection of `bindings`. A `binding` binds one or more `members` to a single `role`. Members can be user accounts, service accounts, Google groups, and domains (such as G Suite). A `role` is a named list of permissions; each `role` can be an IAM predefined role or a user-created custom role. For some types of Google Cloud resources, a `binding` can also specify a `condition`, which is a logical expression that allows access to a resource only if the expression evaluates to `true`. A condition can add constraints based on attributes of the request, the resource, or both. To learn which resources support conditions in their IAM policies, see the [IAM documentation](https://cloud.google.com/iam/help/conditions/resource-policies). **JSON example:** { "bindings": [ { "role": "roles/resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", "group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@appspot.gserviceaccount.com" ] }, { "role": "roles/resourcemanager.organizationViewer", "members": [ "user:eve@example.com" ], "condition": { "title": "expirable access", "description": "Does not grant access after Sep 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", } } ], "etag": "BwWWja0YfJA=", "version": 3 } **YAML example:** bindings: - members: - user:mike@example.com - group:admins@example.com - domain:google.com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/resourcemanager.organizationAdmin - members: - user:eve@example.com role: roles/resourcemanager.organizationViewer condition: title: expirable access description: Does not grant access after Sep 2020 expression: request.time < timestamp('2020-10-01T00:00:00.000Z') etag: BwWWja0YfJA= version: 3 For a description of IAM and its features, see the [IAM documentation](https://cloud.google.com/iam/docs/).
"auditConfigs": [ # Specifies cloud audit logging configuration for this policy.
{ # Specifies the audit configuration for a service. The configuration determines which permission types are logged, and what identities, if any, are exempted from logging. An AuditConfig must have one or more AuditLogConfigs. If there are AuditConfigs for both `allServices` and a specific service, the union of the two AuditConfigs is used for that service: the log_types specified in each AuditConfig are enabled, and the exempted_members in each AuditLogConfig are exempted. Example Policy with multiple AuditConfigs: { "audit_configs": [ { "service": "allServices", "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE" }, { "log_type": "ADMIN_READ" } ] }, { "service": "sampleservice.googleapis.com", "audit_log_configs": [ { "log_type": "DATA_READ" }, { "log_type": "DATA_WRITE", "exempted_members": [ "user:aliya@example.com" ] } ] } ] } For sampleservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also exempts jose@example.com from DATA_READ logging, and aliya@example.com from DATA_WRITE logging.
"auditLogConfigs": [ # The configuration for logging of each type of permission.
{ # Provides the configuration for logging a type of permissions. Example: { "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE" } ] } This enables 'DATA_READ' and 'DATA_WRITE' logging, while exempting jose@example.com from DATA_READ logging.
"exemptedMembers": [ # Specifies the identities that do not cause logging for this type of permission. Follows the same format of Binding.members.
"A String",
],
"ignoreChildExemptions": True or False, # This is deprecated and has no effect. Do not use.
"logType": "A String", # The log type that this config enables.
},
],
"exemptedMembers": [ # This is deprecated and has no effect. Do not use.
"A String",
],
"service": "A String", # Specifies a service that will be enabled for audit logging. For example, `storage.googleapis.com`, `cloudsql.googleapis.com`. `allServices` is a special value that covers all services.
},
],
"bindings": [ # Associates a list of `members` to a `role`. Optionally, may specify a `condition` that determines how and when the `bindings` are applied. Each of the `bindings` must contain at least one member.
{ # Associates `members` with a `role`.
"bindingId": "A String", # This is deprecated and has no effect. Do not use.
"condition": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. Example (Comparison): title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100" Example (Equality): title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email" Example (Logic): title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'" Example (Data Manipulation): title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)" The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information. # The condition that is associated with this binding. If the condition evaluates to `true`, then this binding applies to the current request. If the condition evaluates to `false`, then this binding does not apply to the current request. However, a different role binding might grant the same role to one or more of the members in this binding. To learn which resources support conditions in their IAM policies, see the [IAM documentation](https://cloud.google.com/iam/help/conditions/resource-policies).
"description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
"location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
"title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
},
"members": [ # Specifies the identities requesting access for a Cloud Platform resource. `members` can have the following values: * `allUsers`: A special identifier that represents anyone who is on the internet; with or without a Google account. * `allAuthenticatedUsers`: A special identifier that represents anyone who is authenticated with a Google account or a service account. * `user:{emailid}`: An email address that represents a specific Google account. For example, `alice@example.com` . * `serviceAccount:{emailid}`: An email address that represents a service account. For example, `my-other-app@appspot.gserviceaccount.com`. * `group:{emailid}`: An email address that represents a Google group. For example, `admins@example.com`. * `deleted:user:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a user that has been recently deleted. For example, `alice@example.com?uid=123456789012345678901`. If the user is recovered, this value reverts to `user:{emailid}` and the recovered user retains the role in the binding. * `deleted:serviceAccount:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a service account that has been recently deleted. For example, `my-other-app@appspot.gserviceaccount.com?uid=123456789012345678901`. If the service account is undeleted, this value reverts to `serviceAccount:{emailid}` and the undeleted service account retains the role in the binding. * `deleted:group:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a Google group that has been recently deleted. For example, `admins@example.com?uid=123456789012345678901`. If the group is recovered, this value reverts to `group:{emailid}` and the recovered group retains the role in the binding. * `domain:{domain}`: The G Suite domain (primary) that represents all the users of that domain. For example, `google.com` or `example.com`.
"A String",
],
"role": "A String", # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`, or `roles/owner`.
},
],
"etag": "A String", # `etag` is used for optimistic concurrency control as a way to help prevent simultaneous updates of a policy from overwriting each other. It is strongly suggested that systems make use of the `etag` in the read-modify-write cycle to perform policy updates in order to avoid race conditions: An `etag` is returned in the response to `getIamPolicy`, and systems are expected to put that etag in the request to `setIamPolicy` to ensure that their change will be applied to the same version of the policy. **Important:** If you use IAM Conditions, you must include the `etag` field whenever you call `setIamPolicy`. If you omit this field, then IAM allows you to overwrite a version `3` policy with a version `1` policy, and all of the conditions in the version `3` policy are lost.
"iamOwned": True or False, # This is deprecated and has no effect. Do not use.
"rules": [ # This is deprecated and has no effect. Do not use.
{ # This is deprecated and has no effect. Do not use.
"action": "A String", # This is deprecated and has no effect. Do not use.
"conditions": [ # This is deprecated and has no effect. Do not use.
{ # This is deprecated and has no effect. Do not use.
"iam": "A String", # This is deprecated and has no effect. Do not use.
"op": "A String", # This is deprecated and has no effect. Do not use.
"svc": "A String", # This is deprecated and has no effect. Do not use.
"sys": "A String", # This is deprecated and has no effect. Do not use.
"values": [ # This is deprecated and has no effect. Do not use.
"A String",
],
},
],
"description": "A String", # This is deprecated and has no effect. Do not use.
"ins": [ # This is deprecated and has no effect. Do not use.
"A String",
],
"logConfigs": [ # This is deprecated and has no effect. Do not use.
{ # This is deprecated and has no effect. Do not use.
"cloudAudit": { # This is deprecated and has no effect. Do not use. # This is deprecated and has no effect. Do not use.
"authorizationLoggingOptions": { # This is deprecated and has no effect. Do not use. # This is deprecated and has no effect. Do not use.
"permissionType": "A String", # This is deprecated and has no effect. Do not use.
},
"logName": "A String", # This is deprecated and has no effect. Do not use.
},
"counter": { # This is deprecated and has no effect. Do not use. # This is deprecated and has no effect. Do not use.
"customFields": [ # This is deprecated and has no effect. Do not use.
{ # This is deprecated and has no effect. Do not use.
"name": "A String", # This is deprecated and has no effect. Do not use.
"value": "A String", # This is deprecated and has no effect. Do not use.
},
],
"field": "A String", # This is deprecated and has no effect. Do not use.
"metric": "A String", # This is deprecated and has no effect. Do not use.
},
"dataAccess": { # This is deprecated and has no effect. Do not use. # This is deprecated and has no effect. Do not use.
"logMode": "A String", # This is deprecated and has no effect. Do not use.
},
},
],
"notIns": [ # This is deprecated and has no effect. Do not use.
"A String",
],
"permissions": [ # This is deprecated and has no effect. Do not use.
"A String",
],
},
],
"version": 42, # Specifies the format of the policy. Valid values are `0`, `1`, and `3`. Requests that specify an invalid value are rejected. Any operation that affects conditional role bindings must specify version `3`. This requirement applies to the following operations: * Getting a policy that includes a conditional role binding * Adding a conditional role binding to a policy * Changing a conditional role binding in a policy * Removing any role binding, with or without a condition, from a policy that includes conditions **Important:** If you use IAM Conditions, you must include the `etag` field whenever you call `setIamPolicy`. If you omit this field, then IAM allows you to overwrite a version `3` policy with a version `1` policy, and all of the conditions in the version `3` policy are lost. If a policy does not include any conditions, operations on that policy may specify any valid version or leave the field unset. To learn which resources support conditions in their IAM policies, see the [IAM documentation](https://cloud.google.com/iam/help/conditions/resource-policies).
}
setLabels(project, region, resource, body=None, requestId=None, x__xgafv=None)
Sets the labels on a inPlaceSnapshot in the given region. To learn more about labels, read the Labeling Resources documentation.
Args:
project: string, Project ID for this request. (required)
region: string, The region for this request. (required)
resource: string, Name or id of the resource for this request. (required)
body: object, The request body.
The object takes the form of:
{
"labelFingerprint": "A String", # The fingerprint of the previous set of labels for this resource, used to detect conflicts. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update labels. You must always provide an up-to-date fingerprint hash in order to update or change labels. Make a get() request to the resource to get the latest fingerprint.
"labels": { # The labels to set for this resource.
"a_key": "A String",
},
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported ( 00000000-0000-0000-0000-000000000000).
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Represents an Operation resource. Google Compute Engine has three Operation resources: * [Global](/compute/docs/reference/rest/alpha/globalOperations) * [Regional](/compute/docs/reference/rest/alpha/regionOperations) * [Zonal](/compute/docs/reference/rest/alpha/zoneOperations) You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses. Operations can be global, regional or zonal. - For global operations, use the `globalOperations` resource. - For regional operations, use the `regionOperations` resource. - For zonal operations, use the `zonalOperations` resource. For more information, read Global, Regional, and Zonal Resources.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
"message": "A String", # [Output Only] An optional, human-readable error message.
},
],
},
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as `NOT FOUND`.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a `404` means the resource was not found.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always `compute#operation` for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"operationGroupId": "A String", # [Output Only] An ID that represents a group of operations, such as when a group of operations results from a `bulkInsert` API request.
"operationType": "A String", # [Output Only] The type of operation, such as `insert`, `update`, or `delete`, and so on.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"selfLinkWithId": "A String", # [Output Only] Server-defined URL for this resource with the resource id.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: `PENDING`, `RUNNING`, or `DONE`.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
"user": "A String", # [Output Only] User who requested the operation, for example: `user@example.com`.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example: "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
"value": "A String", # [Output Only] A warning data value corresponding to the key.
},
],
"message": "A String", # [Output Only] A human-readable description of the warning code.
},
],
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
}
testIamPermissions(project, region, resource, body=None, x__xgafv=None)
Returns permissions that a caller has on the specified resource.
Args:
project: string, Project ID for this request. (required)
region: string, The name of the region for this request. (required)
resource: string, Name or id of the resource for this request. (required)
body: object, The request body.
The object takes the form of:
{
"permissions": [ # The set of permissions to check for the 'resource'. Permissions with wildcards (such as '*' or 'storage.*') are not allowed.
"A String",
],
}
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{
"permissions": [ # A subset of `TestPermissionsRequest.permissions` that the caller is allowed.
"A String",
],
}