Remote Build Execution API . actions

close()

Close httplib2 connections.

execute(instanceName, body=None, x__xgafv=None)

Execute an action remotely. In order to execute an action, the client must first upload all of the inputs, the Command to run, and the Action into the ContentAddressableStorage. It then calls `Execute` with an `action_digest` referring to them. The server will run the action and eventually return the result. The input `Action`'s fields MUST meet the various canonicalization requirements specified in the documentation for their types so that it has the same digest as other logically equivalent `Action`s. The server MAY enforce the requirements and return errors if a non-canonical input is received. It MAY also proceed without verifying some or all of the requirements, such as for performance reasons. If the server does not verify the requirement, then it will treat the `Action` as distinct from another logically equivalent action if they hash differently. Returns a stream of google.longrunning.Operation messages describing the resulting execution, with eventual `response` ExecuteResponse. The `metadata` on the operation is of type ExecuteOperationMetadata. If the client remains connected after the first response is returned after the server, then updates are streamed as if the client had called WaitExecution until the execution completes or the request reaches an error. The operation can also be queried using Operations API. The server NEED NOT implement other methods or functionality of the Operations API. Errors discovered during creation of the `Operation` will be reported as gRPC Status errors, while errors that occurred while running the action will be reported in the `status` field of the `ExecuteResponse`. The server MUST NOT set the `error` field of the `Operation` proto. The possible errors include: * `INVALID_ARGUMENT`: One or more arguments are invalid. * `FAILED_PRECONDITION`: One or more errors occurred in setting up the action requested, such as a missing input or command or no worker being available. The client may be able to fix the errors and retry. * `RESOURCE_EXHAUSTED`: There is insufficient quota of some resource to run the action. * `UNAVAILABLE`: Due to a transient condition, such as all workers being occupied (and the server does not support a queue), the action could not be started. The client should retry. * `INTERNAL`: An internal error occurred in the execution engine or the worker. * `DEADLINE_EXCEEDED`: The execution timed out. * `CANCELLED`: The operation was cancelled by the client. This status is only possible if the server implements the Operations API CancelOperation method, and it was called for the current execution. In the case of a missing input or command, the server SHOULD additionally send a PreconditionFailure error detail where, for each requested blob not present in the CAS, there is a `Violation` with a `type` of `MISSING` and a `subject` of `"blobs/{hash}/{size}"` indicating the digest of the missing blob. The server does not need to guarantee that a call to this method leads to at most one execution of the action. The server MAY execute the action multiple times, potentially in parallel. These redundant executions MAY continue to run, even if the operation is completed.

Args:
  instanceName: string, The instance of the execution system to operate against. A server may support multiple instances of the execution system (with their own workers, storage, caches, etc.). The server MAY require use of this field to select between them in an implementation-defined fashion, otherwise it can be omitted. (required)
  body: object, The request body.
    The object takes the form of:

{ # A request message for Execution.Execute.
  "actionDigest": { # A content digest. A digest for a given blob consists of the size of the blob and its hash. The hash algorithm to use is defined by the server. The size is considered to be an integral part of the digest and cannot be separated. That is, even if the `hash` field is correctly specified but `size_bytes` is not, the server MUST reject the request. The reason for including the size in the digest is as follows: in a great many cases, the server needs to know the size of the blob it is about to work with prior to starting an operation with it, such as flattening Merkle tree structures or streaming it to a worker. Technically, the server could implement a separate metadata store, but this results in a significantly more complicated implementation as opposed to having the client specify the size up-front (or storing the size along with the digest in every message where digests are embedded). This does mean that the API leaks some implementation details of (what we consider to be) a reasonable server implementation, but we consider this to be a worthwhile tradeoff. When a `Digest` is used to refer to a proto message, it always refers to the message in binary encoded form. To ensure consistent hashing, clients and servers MUST ensure that they serialize messages according to the following rules, even if there are alternate valid encodings for the same message: * Fields are serialized in tag order. * There are no unknown fields. * There are no duplicate fields. * Fields are serialized according to the default semantics for their type. Most protocol buffer implementations will always follow these rules when serializing, but care should be taken to avoid shortcuts. For instance, concatenating two messages to merge them may produce duplicate fields. # The digest of the Action to execute.
    "hash": "A String", # The hash. In the case of SHA-256, it will always be a lowercase hex string exactly 64 characters long.
    "sizeBytes": "A String", # The size of the blob, in bytes.
  },
  "executionPolicy": { # An `ExecutionPolicy` can be used to control the scheduling of the action. # An optional policy for execution of the action. The server will have a default policy if this is not provided.
    "priority": 42, # The priority (relative importance) of this action. Generally, a lower value means that the action should be run sooner than actions having a greater priority value, but the interpretation of a given value is server- dependent. A priority of 0 means the *default* priority. Priorities may be positive or negative, and such actions should run later or sooner than actions having the default priority, respectively. The particular semantics of this field is up to the server. In particular, every server will have their own supported range of priorities, and will decide how these map into scheduling policy.
  },
  "resultsCachePolicy": { # A `ResultsCachePolicy` is used for fine-grained control over how action outputs are stored in the CAS and Action Cache. # An optional policy for the results of this execution in the remote cache. The server will have a default policy if this is not provided. This may be applied to both the ActionResult and the associated blobs.
    "priority": 42, # The priority (relative importance) of this content in the overall cache. Generally, a lower value means a longer retention time or other advantage, but the interpretation of a given value is server-dependent. A priority of 0 means a *default* value, decided by the server. The particular semantics of this field is up to the server. In particular, every server will have their own supported range of priorities, and will decide how these map into retention/eviction policy.
  },
  "skipCacheLookup": True or False, # If true, the action will be executed even if its result is already present in the ActionCache. The execution is still allowed to be merged with other in-flight executions of the same action, however - semantically, the service MUST only guarantee that the results of an execution with this field set were not visible before the corresponding execution request was sent. Note that actions from execution requests setting this field set are still eligible to be entered into the action cache upon completion, and services SHOULD overwrite any existing entries that may exist. This allows skip_cache_lookup requests to be used as a mechanism for replacing action cache entries that reference outputs no longer available or that are poisoned in any way. If false, the result may be served from the action cache.
}

  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # This resource represents a long-running operation that is the result of a network API call.
  "done": True or False, # If the value is `false`, it means the operation is still in progress. If `true`, the operation is completed, and either `error` or `response` is available.
  "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # The error result of the operation in case of failure or cancellation.
    "code": 42, # The status code, which should be an enum value of google.rpc.Code.
    "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use.
      {
        "a_key": "", # Properties of the object. Contains field @type with type URL.
      },
    ],
    "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
  },
  "metadata": { # Service-specific metadata associated with the operation. It typically contains progress information and common metadata such as create time. Some services might not provide such metadata. Any method that returns a long-running operation should document the metadata type, if any.
    "a_key": "", # Properties of the object. Contains field @type with type URL.
  },
  "name": "A String", # The server-assigned name, which is only unique within the same service that originally returns it. If you use the default HTTP mapping, the `name` should be a resource name ending with `operations/{unique_id}`.
  "response": { # The normal response of the operation in case of success. If the original method returns no data on success, such as `Delete`, the response is `google.protobuf.Empty`. If the original method is standard `Get`/`Create`/`Update`, the response should be the resource. For other methods, the response should have the type `XxxResponse`, where `Xxx` is the original method name. For example, if the original method name is `TakeSnapshot()`, the inferred response type is `TakeSnapshotResponse`.
    "a_key": "", # Properties of the object. Contains field @type with type URL.
  },
}