close()

Close httplib2 connections.

create(body=None, x__xgafv=None)

After the client finishes uploading the photo with the returned UploadRef, CreatePhoto publishes the uploaded Photo to Street View on Google Maps. Currently, the only way to set heading, pitch, and roll in CreatePhoto is through the [Photo Sphere XMP metadata](https://developers.google.com/streetview/spherical-metadata) in the photo bytes. CreatePhoto ignores the `pose.heading`, `pose.pitch`, `pose.roll`, `pose.altitude`, and `pose.level` fields in Pose. This method returns the following error codes: * google.rpc.Code.INVALID_ARGUMENT if the request is malformed or if the uploaded photo is not a 360 photo. * google.rpc.Code.NOT_FOUND if the upload reference does not exist. * google.rpc.Code.RESOURCE_EXHAUSTED if the account has reached the storage limit.

Args:
body: object, The request body.
The object takes the form of:

{ # Photo is used to store 360 photos along with photo metadata.
"captureTime": "A String", # Optional. Absolute time when the photo was captured. When the photo has no exif timestamp, this is used to set a timestamp in the photo metadata.
"connections": [ # Optional. Connections to other photos. A connection represents the link from this photo to another photo.
{ # A connection is the link from a source photo to a destination photo.
"target": { # Identifier for a Photo. # Required. The destination of the connection from the containing photo to another photo.
"id": "A String", # A unique identifier for a photo.
},
},
],
"downloadUrl": "A String", # Output only. The download URL for the photo bytes. This field is set only when GetPhotoRequest.view is set to PhotoView.INCLUDE_DOWNLOAD_URL.
"mapsPublishStatus": "A String", # Output only. Status in Google Maps, whether this photo was published or rejected.
"photoId": { # Identifier for a Photo. # Required. Output only. Required when updating a photo. Output only when creating a photo. Identifier for the photo, which is unique among all photos in Google.
"id": "A String", # A unique identifier for a photo.
},
"places": [ # Optional. Places where this photo belongs.
{ # Place metadata for an entity.
"languageCode": "A String", # Output only. The language_code that the name is localized with. This should be the language_code specified in the request, but may be a fallback.
"name": "A String", # Output only. The name of the place, localized to the language_code.
"placeId": "A String", # Place identifier, as described in https://developers.google.com/places/place-id.
},
],
"pose": { # Raw pose measurement for an entity. # Optional. Pose of the photo.
"accuracyMeters": 3.14, # The estimated horizontal accuracy of this pose in meters with 68% confidence (one standard deviation). For example, on Android, this value is available from this method: https://developer.android.com/reference/android/location/Location#getAccuracy(). Other platforms have different methods of obtaining similar accuracy estimations.
"altitude": 3.14, # Altitude of the pose in meters above WGS84 ellipsoid. NaN indicates an unmeasured quantity.
"heading": 3.14, # The following pose parameters pertain to the center of the photo. They match https://developers.google.com/streetview/spherical-metadata. Compass heading, measured at the center of the photo in degrees clockwise from North. Value must be >=0 and <360. NaN indicates an unmeasured quantity.
"latLngPair": { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this object must conform to the WGS84 standard. Values must be within normalized ranges. # Latitude and longitude pair of the pose, as explained here: https://cloud.google.com/datastore/docs/reference/rest/Shared.Types/LatLng When creating a Photo, if the latitude and longitude pair are not provided, the geolocation from the exif header is used. A latitude and longitude pair not provided in the photo or exif header causes the photo process to fail.
"latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
"longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
},
"level": { # Level information containing level number and its corresponding name. # Level (the floor in a building) used to configure vertical navigation.
"name": "A String", # Required. A name assigned to this Level, restricted to 3 characters. Consider how the elevator buttons would be labeled for this level if there was an elevator.
"number": 3.14, # Optional. Floor number, used for ordering. 0 indicates the ground level, 1 indicates the first level above ground level, -1 indicates the first level under ground level. Non-integer values are OK.
},
"pitch": 3.14, # Pitch, measured at the center of the photo in degrees. Value must be >=-90 and <= 90. A value of -90 means looking directly down, and a value of 90 means looking directly up. NaN indicates an unmeasured quantity.
"roll": 3.14, # Roll, measured in degrees. Value must be >= 0 and <360. A value of 0 means level with the horizon. NaN indicates an unmeasured quantity.
},
"shareLink": "A String", # Output only. The share link for the photo.
"thumbnailUrl": "A String", # Output only. The thumbnail URL for showing a preview of the given photo.
"transferStatus": "A String", # Output only. Status of rights transfer on this photo.
"uploadReference": { # Upload reference for media files. # Input only. Required when creating a photo. Input only. The resource URL where the photo bytes are uploaded to.
"uploadUrl": "A String", # An upload reference should be unique for each user. It follows the form: "https://streetviewpublish.googleapis.com/media/user/{account_id}/photo/{upload_reference}"
},
"uploadTime": "A String", # Output only. Time when the image was uploaded.
"viewCount": "A String", # Output only. View count of the photo.
}

x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format

Returns:
An object of the form:

{ # Photo is used to store 360 photos along with photo metadata.
"captureTime": "A String", # Optional. Absolute time when the photo was captured. When the photo has no exif timestamp, this is used to set a timestamp in the photo metadata.
"connections": [ # Optional. Connections to other photos. A connection represents the link from this photo to another photo.
{ # A connection is the link from a source photo to a destination photo.
"target": { # Identifier for a Photo. # Required. The destination of the connection from the containing photo to another photo.
"id": "A String", # A unique identifier for a photo.
},
},
],
"downloadUrl": "A String", # Output only. The download URL for the photo bytes. This field is set only when GetPhotoRequest.view is set to PhotoView.INCLUDE_DOWNLOAD_URL.
"mapsPublishStatus": "A String", # Output only. Status in Google Maps, whether this photo was published or rejected.
"photoId": { # Identifier for a Photo. # Required. Output only. Required when updating a photo. Output only when creating a photo. Identifier for the photo, which is unique among all photos in Google.
"id": "A String", # A unique identifier for a photo.
},
"places": [ # Optional. Places where this photo belongs.
{ # Place metadata for an entity.
"languageCode": "A String", # Output only. The language_code that the name is localized with. This should be the language_code specified in the request, but may be a fallback.
"name": "A String", # Output only. The name of the place, localized to the language_code.
"placeId": "A String", # Place identifier, as described in https://developers.google.com/places/place-id.
},
],
"pose": { # Raw pose measurement for an entity. # Optional. Pose of the photo.
"accuracyMeters": 3.14, # The estimated horizontal accuracy of this pose in meters with 68% confidence (one standard deviation). For example, on Android, this value is available from this method: https://developer.android.com/reference/android/location/Location#getAccuracy(). Other platforms have different methods of obtaining similar accuracy estimations.
"altitude": 3.14, # Altitude of the pose in meters above WGS84 ellipsoid. NaN indicates an unmeasured quantity.
"heading": 3.14, # The following pose parameters pertain to the center of the photo. They match https://developers.google.com/streetview/spherical-metadata. Compass heading, measured at the center of the photo in degrees clockwise from North. Value must be >=0 and <360. NaN indicates an unmeasured quantity.
"latLngPair": { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this object must conform to the WGS84 standard. Values must be within normalized ranges. # Latitude and longitude pair of the pose, as explained here: https://cloud.google.com/datastore/docs/reference/rest/Shared.Types/LatLng When creating a Photo, if the latitude and longitude pair are not provided, the geolocation from the exif header is used. A latitude and longitude pair not provided in the photo or exif header causes the photo process to fail.
"latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
"longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
},
"level": { # Level information containing level number and its corresponding name. # Level (the floor in a building) used to configure vertical navigation.
"name": "A String", # Required. A name assigned to this Level, restricted to 3 characters. Consider how the elevator buttons would be labeled for this level if there was an elevator.
"number": 3.14, # Optional. Floor number, used for ordering. 0 indicates the ground level, 1 indicates the first level above ground level, -1 indicates the first level under ground level. Non-integer values are OK.
},
"pitch": 3.14, # Pitch, measured at the center of the photo in degrees. Value must be >=-90 and <= 90. A value of -90 means looking directly down, and a value of 90 means looking directly up. NaN indicates an unmeasured quantity.
"roll": 3.14, # Roll, measured in degrees. Value must be >= 0 and <360. A value of 0 means level with the horizon. NaN indicates an unmeasured quantity.
},
"shareLink": "A String", # Output only. The share link for the photo.
"thumbnailUrl": "A String", # Output only. The thumbnail URL for showing a preview of the given photo.
"transferStatus": "A String", # Output only. Status of rights transfer on this photo.
"uploadReference": { # Upload reference for media files. # Input only. Required when creating a photo. Input only. The resource URL where the photo bytes are uploaded to.
"uploadUrl": "A String", # An upload reference should be unique for each user. It follows the form: "https://streetviewpublish.googleapis.com/media/user/{account_id}/photo/{upload_reference}"
},
"uploadTime": "A String", # Output only. Time when the image was uploaded.
"viewCount": "A String", # Output only. View count of the photo.
}

delete(photoId, x__xgafv=None)

Deletes a Photo and its metadata. This method returns the following error codes: * google.rpc.Code.PERMISSION_DENIED if the requesting user did not create the requested photo. * google.rpc.Code.NOT_FOUND if the photo ID does not exist.

Args:
  photoId: string, Required. ID of the Photo. (required)
  x__xgafv: string, V1 error format.
    Allowed values
      1 - v1 error format
      2 - v2 error format

Returns:
  An object of the form:

    { # A generic empty message that you can re-use to avoid defining duplicated empty messages in your APIs. A typical example is to use it as the request or the response type of an API method. For instance: service Foo { rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty); } The JSON representation for `Empty` is empty JSON object `{}`.
}

get(photoId, languageCode=None, view=None, x__xgafv=None)

Gets the metadata of the specified Photo. This method returns the following error codes: * google.rpc.Code.PERMISSION_DENIED if the requesting user did not create the requested Photo. * google.rpc.Code.NOT_FOUND if the requested Photo does not exist. * google.rpc.Code.UNAVAILABLE if the requested Photo is still being indexed.

Args:
photoId: string, Required. ID of the Photo. (required)
languageCode: string, The BCP-47 language code, such as "en-US" or "sr-Latn". For more information, see http://www.unicode.org/reports/tr35/#Unicode_locale_identifier. If language_code is unspecified, the user's language preference for Google services is used.
view: string, Required. Specifies if a download URL for the photo bytes should be returned in the Photo response.
Allowed values
BASIC - Server responses do not include the download URL for the photo bytes. The default value.
INCLUDE_DOWNLOAD_URL - Server responses include the download URL for the photo bytes.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format

Returns:
An object of the form:

{ # Photo is used to store 360 photos along with photo metadata.
"captureTime": "A String", # Optional. Absolute time when the photo was captured. When the photo has no exif timestamp, this is used to set a timestamp in the photo metadata.
"connections": [ # Optional. Connections to other photos. A connection represents the link from this photo to another photo.
{ # A connection is the link from a source photo to a destination photo.
"target": { # Identifier for a Photo. # Required. The destination of the connection from the containing photo to another photo.
"id": "A String", # A unique identifier for a photo.
},
},
],
"downloadUrl": "A String", # Output only. The download URL for the photo bytes. This field is set only when GetPhotoRequest.view is set to PhotoView.INCLUDE_DOWNLOAD_URL.
"mapsPublishStatus": "A String", # Output only. Status in Google Maps, whether this photo was published or rejected.
"photoId": { # Identifier for a Photo. # Required. Output only. Required when updating a photo. Output only when creating a photo. Identifier for the photo, which is unique among all photos in Google.
"id": "A String", # A unique identifier for a photo.
},
"places": [ # Optional. Places where this photo belongs.
{ # Place metadata for an entity.
"languageCode": "A String", # Output only. The language_code that the name is localized with. This should be the language_code specified in the request, but may be a fallback.
"name": "A String", # Output only. The name of the place, localized to the language_code.
"placeId": "A String", # Place identifier, as described in https://developers.google.com/places/place-id.
},
],
"pose": { # Raw pose measurement for an entity. # Optional. Pose of the photo.
"accuracyMeters": 3.14, # The estimated horizontal accuracy of this pose in meters with 68% confidence (one standard deviation). For example, on Android, this value is available from this method: https://developer.android.com/reference/android/location/Location#getAccuracy(). Other platforms have different methods of obtaining similar accuracy estimations.
"altitude": 3.14, # Altitude of the pose in meters above WGS84 ellipsoid. NaN indicates an unmeasured quantity.
"heading": 3.14, # The following pose parameters pertain to the center of the photo. They match https://developers.google.com/streetview/spherical-metadata. Compass heading, measured at the center of the photo in degrees clockwise from North. Value must be >=0 and <360. NaN indicates an unmeasured quantity.
"latLngPair": { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this object must conform to the WGS84 standard. Values must be within normalized ranges. # Latitude and longitude pair of the pose, as explained here: https://cloud.google.com/datastore/docs/reference/rest/Shared.Types/LatLng When creating a Photo, if the latitude and longitude pair are not provided, the geolocation from the exif header is used. A latitude and longitude pair not provided in the photo or exif header causes the photo process to fail.
"latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
"longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
},
"level": { # Level information containing level number and its corresponding name. # Level (the floor in a building) used to configure vertical navigation.
"name": "A String", # Required. A name assigned to this Level, restricted to 3 characters. Consider how the elevator buttons would be labeled for this level if there was an elevator.
"number": 3.14, # Optional. Floor number, used for ordering. 0 indicates the ground level, 1 indicates the first level above ground level, -1 indicates the first level under ground level. Non-integer values are OK.
},
"pitch": 3.14, # Pitch, measured at the center of the photo in degrees. Value must be >=-90 and <= 90. A value of -90 means looking directly down, and a value of 90 means looking directly up. NaN indicates an unmeasured quantity.
"roll": 3.14, # Roll, measured in degrees. Value must be >= 0 and <360. A value of 0 means level with the horizon. NaN indicates an unmeasured quantity.
},
"shareLink": "A String", # Output only. The share link for the photo.
"thumbnailUrl": "A String", # Output only. The thumbnail URL for showing a preview of the given photo.
"transferStatus": "A String", # Output only. Status of rights transfer on this photo.
"uploadReference": { # Upload reference for media files. # Input only. Required when creating a photo. Input only. The resource URL where the photo bytes are uploaded to.
"uploadUrl": "A String", # An upload reference should be unique for each user. It follows the form: "https://streetviewpublish.googleapis.com/media/user/{account_id}/photo/{upload_reference}"
},
"uploadTime": "A String", # Output only. Time when the image was uploaded.
"viewCount": "A String", # Output only. View count of the photo.
}

startUpload(body=None, x__xgafv=None)

Creates an upload session to start uploading photo bytes. The method uses the upload URL of the returned UploadRef to upload the bytes for the Photo. In addition to the photo requirements shown in https://support.google.com/maps/answer/7012050?ref_topic=6275604, the photo must meet the following requirements: * Photo Sphere XMP metadata must be included in the photo metadata. See https://developers.google.com/streetview/spherical-metadata for the required fields. * The pixel size of the photo must meet the size requirements listed in https://support.google.com/maps/answer/7012050?ref_topic=6275604, and the photo must be a full 360 horizontally. After the upload completes, the method uses UploadRef with CreatePhoto to create the Photo object entry.

Args:
body: object, The request body.
The object takes the form of:

{ # A generic empty message that you can re-use to avoid defining duplicated empty messages in your APIs. A typical example is to use it as the request or the response type of an API method. For instance: service Foo { rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty); } The JSON representation for `Empty` is empty JSON object `{}`.
}

x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format

Returns:
An object of the form:

{ # Upload reference for media files.
"uploadUrl": "A String", # An upload reference should be unique for each user. It follows the form: "https://streetviewpublish.googleapis.com/media/user/{account_id}/photo/{upload_reference}"
}

update(id, body=None, updateMask=None, x__xgafv=None)

Updates the metadata of a Photo, such as pose, place association, connections, etc. Changing the pixels of a photo is not supported. Only the fields specified in the updateMask field are used. If `updateMask` is not present, the update applies to all fields. This method returns the following error codes: * google.rpc.Code.PERMISSION_DENIED if the requesting user did not create the requested photo. * google.rpc.Code.INVALID_ARGUMENT if the request is malformed. * google.rpc.Code.NOT_FOUND if the requested photo does not exist. * google.rpc.Code.UNAVAILABLE if the requested Photo is still being indexed.

Args:
id: string, A unique identifier for a photo. (required)
body: object, The request body.
The object takes the form of:

{ # Photo is used to store 360 photos along with photo metadata.
"captureTime": "A String", # Optional. Absolute time when the photo was captured. When the photo has no exif timestamp, this is used to set a timestamp in the photo metadata.
"connections": [ # Optional. Connections to other photos. A connection represents the link from this photo to another photo.
{ # A connection is the link from a source photo to a destination photo.
"target": { # Identifier for a Photo. # Required. The destination of the connection from the containing photo to another photo.
"id": "A String", # A unique identifier for a photo.
},
},
],
"downloadUrl": "A String", # Output only. The download URL for the photo bytes. This field is set only when GetPhotoRequest.view is set to PhotoView.INCLUDE_DOWNLOAD_URL.
"mapsPublishStatus": "A String", # Output only. Status in Google Maps, whether this photo was published or rejected.
"photoId": { # Identifier for a Photo. # Required. Output only. Required when updating a photo. Output only when creating a photo. Identifier for the photo, which is unique among all photos in Google.
"id": "A String", # A unique identifier for a photo.
},
"places": [ # Optional. Places where this photo belongs.
{ # Place metadata for an entity.
"languageCode": "A String", # Output only. The language_code that the name is localized with. This should be the language_code specified in the request, but may be a fallback.
"name": "A String", # Output only. The name of the place, localized to the language_code.
"placeId": "A String", # Place identifier, as described in https://developers.google.com/places/place-id.
},
],
"pose": { # Raw pose measurement for an entity. # Optional. Pose of the photo.
"accuracyMeters": 3.14, # The estimated horizontal accuracy of this pose in meters with 68% confidence (one standard deviation). For example, on Android, this value is available from this method: https://developer.android.com/reference/android/location/Location#getAccuracy(). Other platforms have different methods of obtaining similar accuracy estimations.
"altitude": 3.14, # Altitude of the pose in meters above WGS84 ellipsoid. NaN indicates an unmeasured quantity.
"heading": 3.14, # The following pose parameters pertain to the center of the photo. They match https://developers.google.com/streetview/spherical-metadata. Compass heading, measured at the center of the photo in degrees clockwise from North. Value must be >=0 and <360. NaN indicates an unmeasured quantity.
"latLngPair": { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this object must conform to the WGS84 standard. Values must be within normalized ranges. # Latitude and longitude pair of the pose, as explained here: https://cloud.google.com/datastore/docs/reference/rest/Shared.Types/LatLng When creating a Photo, if the latitude and longitude pair are not provided, the geolocation from the exif header is used. A latitude and longitude pair not provided in the photo or exif header causes the photo process to fail.
"latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
"longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
},
"level": { # Level information containing level number and its corresponding name. # Level (the floor in a building) used to configure vertical navigation.
"name": "A String", # Required. A name assigned to this Level, restricted to 3 characters. Consider how the elevator buttons would be labeled for this level if there was an elevator.
"number": 3.14, # Optional. Floor number, used for ordering. 0 indicates the ground level, 1 indicates the first level above ground level, -1 indicates the first level under ground level. Non-integer values are OK.
},
"pitch": 3.14, # Pitch, measured at the center of the photo in degrees. Value must be >=-90 and <= 90. A value of -90 means looking directly down, and a value of 90 means looking directly up. NaN indicates an unmeasured quantity.
"roll": 3.14, # Roll, measured in degrees. Value must be >= 0 and <360. A value of 0 means level with the horizon. NaN indicates an unmeasured quantity.
},
"shareLink": "A String", # Output only. The share link for the photo.
"thumbnailUrl": "A String", # Output only. The thumbnail URL for showing a preview of the given photo.
"transferStatus": "A String", # Output only. Status of rights transfer on this photo.
"uploadReference": { # Upload reference for media files. # Input only. Required when creating a photo. Input only. The resource URL where the photo bytes are uploaded to.
"uploadUrl": "A String", # An upload reference should be unique for each user. It follows the form: "https://streetviewpublish.googleapis.com/media/user/{account_id}/photo/{upload_reference}"
},
"uploadTime": "A String", # Output only. Time when the image was uploaded.
"viewCount": "A String", # Output only. View count of the photo.
}

updateMask: string, Required. Mask that identifies fields on the photo metadata to update. If not present, the old Photo metadata is entirely replaced with the new Photo metadata in this request. The update fails if invalid fields are specified. Multiple fields can be specified in a comma-delimited list. The following fields are valid: * `pose.heading` * `pose.latLngPair` * `pose.pitch` * `pose.roll` * `pose.level` * `pose.altitude` * `connections` * `places` > Note: When updateMask contains repeated fields, the entire set of repeated values get replaced with the new contents. For example, if updateMask contains `connections` and `UpdatePhotoRequest.photo.connections` is empty, all connections are removed.
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format

Returns:
An object of the form:

{ # Photo is used to store 360 photos along with photo metadata.
"captureTime": "A String", # Optional. Absolute time when the photo was captured. When the photo has no exif timestamp, this is used to set a timestamp in the photo metadata.
"connections": [ # Optional. Connections to other photos. A connection represents the link from this photo to another photo.
{ # A connection is the link from a source photo to a destination photo.
"target": { # Identifier for a Photo. # Required. The destination of the connection from the containing photo to another photo.
"id": "A String", # A unique identifier for a photo.
},
},
],
"downloadUrl": "A String", # Output only. The download URL for the photo bytes. This field is set only when GetPhotoRequest.view is set to PhotoView.INCLUDE_DOWNLOAD_URL.
"mapsPublishStatus": "A String", # Output only. Status in Google Maps, whether this photo was published or rejected.
"photoId": { # Identifier for a Photo. # Required. Output only. Required when updating a photo. Output only when creating a photo. Identifier for the photo, which is unique among all photos in Google.
"id": "A String", # A unique identifier for a photo.
},
"places": [ # Optional. Places where this photo belongs.
{ # Place metadata for an entity.
"languageCode": "A String", # Output only. The language_code that the name is localized with. This should be the language_code specified in the request, but may be a fallback.
"name": "A String", # Output only. The name of the place, localized to the language_code.
"placeId": "A String", # Place identifier, as described in https://developers.google.com/places/place-id.
},
],
"pose": { # Raw pose measurement for an entity. # Optional. Pose of the photo.
"accuracyMeters": 3.14, # The estimated horizontal accuracy of this pose in meters with 68% confidence (one standard deviation). For example, on Android, this value is available from this method: https://developer.android.com/reference/android/location/Location#getAccuracy(). Other platforms have different methods of obtaining similar accuracy estimations.
"altitude": 3.14, # Altitude of the pose in meters above WGS84 ellipsoid. NaN indicates an unmeasured quantity.
"heading": 3.14, # The following pose parameters pertain to the center of the photo. They match https://developers.google.com/streetview/spherical-metadata. Compass heading, measured at the center of the photo in degrees clockwise from North. Value must be >=0 and <360. NaN indicates an unmeasured quantity.
"latLngPair": { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this object must conform to the WGS84 standard. Values must be within normalized ranges. # Latitude and longitude pair of the pose, as explained here: https://cloud.google.com/datastore/docs/reference/rest/Shared.Types/LatLng When creating a Photo, if the latitude and longitude pair are not provided, the geolocation from the exif header is used. A latitude and longitude pair not provided in the photo or exif header causes the photo process to fail.
"latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0].
"longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0].
},
"level": { # Level information containing level number and its corresponding name. # Level (the floor in a building) used to configure vertical navigation.
"name": "A String", # Required. A name assigned to this Level, restricted to 3 characters. Consider how the elevator buttons would be labeled for this level if there was an elevator.
"number": 3.14, # Optional. Floor number, used for ordering. 0 indicates the ground level, 1 indicates the first level above ground level, -1 indicates the first level under ground level. Non-integer values are OK.
},
"pitch": 3.14, # Pitch, measured at the center of the photo in degrees. Value must be >=-90 and <= 90. A value of -90 means looking directly down, and a value of 90 means looking directly up. NaN indicates an unmeasured quantity.
"roll": 3.14, # Roll, measured in degrees. Value must be >= 0 and <360. A value of 0 means level with the horizon. NaN indicates an unmeasured quantity.
},
"shareLink": "A String", # Output only. The share link for the photo.
"thumbnailUrl": "A String", # Output only. The thumbnail URL for showing a preview of the given photo.
"transferStatus": "A String", # Output only. Status of rights transfer on this photo.
"uploadReference": { # Upload reference for media files. # Input only. Required when creating a photo. Input only. The resource URL where the photo bytes are uploaded to.
"uploadUrl": "A String", # An upload reference should be unique for each user. It follows the form: "https://streetviewpublish.googleapis.com/media/user/{account_id}/photo/{upload_reference}"
},
"uploadTime": "A String", # Output only. Time when the image was uploaded.
"viewCount": "A String", # Output only. View count of the photo.
}

Street View Publish API . photo

Instance Methods

Method Details